コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル

Aluminium Oxide Abrasive Grit: Alundum by Jacobs's Process (Stansfield, 1914)
Alundum, the artificial corundum made at Niagara Falls by the Norton Company: bauxite, calcined to drive off its water, is fused in an electric arc furnace with about 5 per cent carbon, which reduces its iron, silicon and titanium to metal nodules; the fused alumina cools slowly into a hard crystalline mass that is crushed and sized as abrasive grit.
Bauxite melts near 2,000 °C and could not be melted commercially without the electric furnace.
Source: A. Stansfield, The Electric Furnace, 2nd ed. (1914), pp. 357-358. Picture: the book's Fig. 143, the Higgins alundum furnace.
上級者
Unknown
手順
1
1
Calcine the bauxite
Calcine the bauxite
Calcine the bauxite in a rotary kiln to drive off its combined water.
このステップの材料:
ボーキサイト1 個必要な工具:
ロータリーキルン2
2
Fuse in the arc furnace
Fuse in the arc furnace
Strike arcs between the electrodes and the carbon lining of the furnace bottom, then feed the calcined bauxite, with about 5 per cent carbon, in round the arcs; it melts and in time carries the current between the two arcs. Lower the water-cooled shell as the fused alundum builds up; the lower part solidifies as it fills.
このステップの材料:
炭素1 about 5 per cent必要な工具:
電気アーク炉3
3
Cool slowly
Cool slowly
When the shell is full, lift it with its contents off the base, put another shell in place, and let the alundum cool slowly so it grows into a hard, tough crystalline mass.
必要な工具:
電気アーク炉4
4
Crush, separate and size
Crush, separate and size
Break up and crush the mass, separate the nodules of reduced metal mechanically, and size the grains for use as an abrasive.
必要な工具:
岩石破砕機
ふるい組(段階目)この設計図で作るもの
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。
