コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル

Bench Grinder: Made from an Old Engine Piston (Shop Notes, 1919)
A belt-driven bench grinder or polishing head built from a worn engine piston: the shaft runs in bushings in the piston-pin bosses, the belt pulley turns inside the piston (which guards it), and emery or polishing wheels go on one or both ends.
Source: Popular Mechanics Shop Notes for 1919, p. 3249. Unknown: sizes. Picture: the article's drawing.
中級者
Unknown
手順
1
1
Bush the piston
Bush the piston
Fit the piston-pin bearings of an old piston with brass or bronze bushings, or pour babbitt round the shaft to form the bearing. Fit a grease cup on top, as in the drawing.
このステップの材料:
ピストン・コンロッド組立品1 old piston
真鍮管2 bushings
不明な金属1 grease cup必要な工具:
ハンドドリル
金工ヤスリ2
2
Fit shaft, pulley and wheels
Fit shaft, pulley and wheels
Cut oil grooves along the shaft. Put the belt pulley on it inside the piston, where the piston wall guards the belt. Hold the shaft endwise with collars and setscrews, and mount emery or polishing wheels on one or both ends.
このステップの材料:
軟鋼丸棒1 個
滑車1 個
Shaft Collar2 個
研削砥石1 emery or polishing必要な工具:
金属旋盤
モンキーレンチ3
3
Mount it
Mount it
Bolt the piston to the bench or to a special stand; make the stand very stiff for the high speeds these tools run at.
このステップの材料:
六角ボルト - 強度区分 8.81 number not given必要な工具:
モンキーレンチ材料
8- 1 old pistonプレースホルダー
- 2 bushingsプレースホルダー
- 1 grease cupプレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 2 個プレースホルダー
- 1 emery or polishingプレースホルダー
- 1 number not givenプレースホルダー
この設計図で作るもの
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。
