コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
Brazing Torch: a Pressure-Tank Gasoline or Kerosene Torch (Shop Notes, 1909)
Forge

作成者

Forge

4. 11月 2026NO
14
0
0
0
0

Brazing Torch: a Pressure-Tank Gasoline or Kerosene Torch (Shop Notes, 1909)

A shop brazing and tempering torch: a wall-hung pipe tank of gasoline or kerosene pumped up with a bicycle pump, feeding a 1/8 in pipe whose end is coiled round a short 1 in pipe; the flame heats the coil, the oil turns to gas, and it blasts out through a pinhole cap. Two burners on a tee give a bigger heat. Source: Popular Mechanics Shop Notes for 1909, pp. 861-862. Picture: the article's drawing.
中級者
Unknown

手順

1

Make the tank

Cap both ends of a 2 in pipe 20 in long. Drill three holes in the top cap: one for the rubber tube from a bicycle pump, one for a steam gauge, and one with a screw plug for filling with fuel oil.

このステップの材料:

鋼管(厚肉・両端ねじ切り)鋼管(厚肉・両端ねじ切り)1 2 in x 20 in
ねじ込み管継手ねじ込み管継手3 two caps, plug
圧力計圧力計1 個
ゴム管ゴム管1 個

必要な工具:

ハンドドリルハンドドリル
ねじ切りタップダイスセットねじ切りタップダイスセット
パイプレンチパイプレンチ
自転車用フロアポンプ自転車用フロアポンプ
2

Coil the burner

Drill the bottom cap and connect a 1/8 in pipe D, any length, with a globe valve in it to set and shut off the oil. Fill the last 10 in of the pipe with lead, coil it round a 1 in pipe F 6 in long, and turn the end out to take two elbows and a short nipple; then melt the lead out. Drill a small hole in the centre of a 1/8 in cap and fit it on the end (E) so the hole lines up with the centre of pipe F.

このステップの材料:

鋼管(厚肉・両端ねじ切り)鋼管(厚肉・両端ねじ切り)1 1/8 in, and 1 in x 6 in
ねじ込み管継手ねじ込み管継手4 two elbows, nipple, 1/8 in cap
玉形弁玉形弁1 個

必要な工具:

鉛鉛
穴あきすくい網穴あきすくい網
鍛冶炉鍛冶炉
ハンドドリルハンドドリル
パイプレンチパイプレンチ
3

Start the burner

Hang a little cup holding three or four teaspoonfuls of oil just below the coil and light it to heat the coil; then pump up the tank and open the globe valve. For more heat connect two burners on a tee so their blasts meet.

必要な工具:

灯油灯油
自転車用フロアポンプ自転車用フロアポンプ

材料

5

必要な工具

8

CC0 パブリックドメイン

このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。

メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

ディスカッション

(0)

ログイン してディスカッションに参加

コメントを読み込み中...