
Feather and Wedge
手順
Prove stone is weak in tension
Prove stone is weak in tension
Establish the asymmetry the method exploits.
- Stand on a small slab of stone laid flat on the ground — it takes the compression easily.
- Support the same slab at both ends only and load the middle.
- It breaks at a fraction of the load.
このステップの材料:
Firebricks2 個Read the grain before you mark the line
Read the grain before you mark the line
Granite has directional weakness, and quarrymen have names for it.
- Look for the rift — the direction it splits most easily.
- Find the grain — the next easiest.
- The hardway is the third, and you avoid it.
このステップの材料:
Convex Lens1 個Drill the row and set the feathers
Drill the row and set the feathers
Evenly spaced, equal depth, all in line.
- Drill holes along the marked line, typically 100-150 mm apart in granite.
- Drop two feathers into each hole, with their flat backs facing along the line.
- Insert a plug between each pair, leaving it standing proud.
このステップの材料:
Steel Wedges6 個
Cold Chisel (pointed)1 個Tap along the row, and listen
Tap along the row, and listen
Patience is the technique. Eye protection throughout.
- Tap each plug once, lightly, working along the row.
- Return to the start and repeat, again and again.
- Listen — the note changes and a hairline appears before it goes.
このステップの材料:
Carving Mallet (Lignum Vitae)1 個History and context
History and context
Splitting stone with wedges is ancient. Egyptian and Roman quarries show wedge slots, and there is a long-running argument about whether wooden wedges were soaked to swell and split the stone — the evidence is genuinely mixed, and dry wooden wedges hammered in work perfectly well, so the soaking story should be treated as plausible rather than established.
The modern plug-and-feather set is a nineteenth-century refinement associated with New England granite quarrying, where it replaced the older method of cutting a continuous slot with a chisel. It is far faster and wastes almost no stone — a slot turns a line of material into dust, while a split consumes only the drill holes.
Look for the marks. Half-round grooves along the edge of a granite kerbstone, bridge abutment or old building block are the remains of the drill holes, sliced in two by the split. They are all over nineteenth-century masonry once you know to look, and they date the stone as surely as a tool mark can.
Still current. Quarries use hydraulic splitters and diamond wire now, but plug and feather remains standard for trimming, for work where vibration matters, and for conservation — and a set of feathers and wedges costs very little and needs no power. It is one of those techniques that industrialisation improved without ever replacing.
Safety: eye protection without exception — steel-on-steel throws chips, and the stone releases suddenly. Keep hands clear of the split line and expect the two halves to move.
材料
5- 2 個プレースホルダー
- 1 個プレースホルダー
- 6 個プレースホルダー
- プレースホルダー
- プレースホルダー
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。