コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
Gasholder: Water-Sealed Zinc Gasometer with Balance Weights (Ramsay & Travers, 1898)
Charlie

作成者

Charlie

4. 11月 2026DE
10
0
0
0
0

Gasholder: Water-Sealed Zinc Gasometer with Balance Weights (Ramsay & Travers, 1898)

The laboratory gasometer Ramsay and Travers used to store argon: a zinc bell that rises and falls in a narrow ring of water between two fixed zinc cylinders. Because the water space is only about 2 cm wide, little gas dissolves in it. Weights on cords over pulleys balance the bell, and weights laid on top push the gas out. Result: a water-sealed gasholder of 18 to 180 litres. Source: M. W. Travers, The Experimental Study of Gases (1901), pp. 30 and 105-106. Unknown: sizes and how the zinc is joined. Picture: Fig. 34, the small mercury form of the same design.
中級者
Unknown

手順

1

Make the fixed cylinders

Make two concentric zinc cylinders on a closed base, leaving a ring-shaped space about 2 cm wide between them for the water. Make the top of the inner cylinder dome-shaped. Bring a gas pipe with a stopcock up through the inner cylinder. Ours: zinc soldered with tin-lead solder. Not given: sizes, how the zinc is joined, the stopcock.

このステップの材料:

亜鉛板亜鉛板1 outer and inner cylinders, base
錫鉛はんだ錫鉛はんだ1 seams
不明なバルブ不明なバルブ1 gas stopcock

必要な工具:

金切りばさみ金切りばさみ
はんだごてはんだごて
不明な成形方法不明な成形方法
不明な寸法不明な寸法
2

Make and hang the bell

Make the gasholder bell of zinc to fit closely over the inner cylinder and down into the water ring, with a dome-shaped top matching the inner cylinder's, so all the gas can be pushed out. Ramsay and Travers made bells of about 180, 27, 18 and 18 litres. Tie a cord to the top of the bell and pass it over pulleys to a hanging weight, to take the bell's own weight off the gas. Fill the ring with water. To deliver gas, take weight off the cord or lay weights on top of the bell. Not given: the weights.

このステップの材料:

亜鉛板亜鉛板1 bell
錫鉛はんだ錫鉛はんだ1 seams
麻ひも麻ひも1 balance cords
滑車滑車2 pulleys
不明な金属不明な金属1 balance weights

必要な工具:

金切りばさみ金切りばさみ
はんだごてはんだごて

材料

6
  • 1 bell
    プレースホルダー
  • プレースホルダー
  • 1 gas stopcock
    プレースホルダー
  • 1 balance cords
    プレースホルダー
  • 2 pulleys
    プレースホルダー
  • 1 balance weights
    プレースホルダー

必要な工具

4

CC0 パブリックドメイン

このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。

メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

ディスカッション

(0)

ログイン してディスカッションに参加

コメントを読み込み中...