コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
Forged Lathe Tools: Narrow Cutting-Off Tool and Bent-Tip Inside Boring Tool, Ground to Rake and Clearance (Griswold, 1904)
Forge

作成者

Forge

14. 11月 2026NO
4
0
0
0
0

Forged Lathe Tools: Narrow Cutting-Off Tool and Bent-Tip Inside Boring Tool, Ground to Rake and Clearance (Griswold, 1904)

Two of the forged lathe tools in Robert Gibson Griswold's Tool Making for Amateurs (Boston, 1904): a cutting-off (parting) tool deep under a very narrow edge with relieved sides and a chip-splitting groove, and an inside boring and threading tool drawn to a long taper with the tip bent left; both ground to 3-5 degree clearance and the rake suited to the metal.
上級者
Half a day per tool

手順

1

His angles

Jupyter ノートブックを読み込み中…
2

Read Griswold

"The writer uses a tool slightly less than 1-16 in. wide and 1 in. deep for short cuts."
3

Forge the cutting-off tool

Forge tool steel (stock size ours, to suit your tool post) into a blade deep under the cutting edge, with the point the widest part and the sides relieved behind it so it cannot bind (his fig. 18): slightly under 1/16 in. wide and 1 in. deep for work up to 1/2 in., about 3/32 in. wide for work up to 2 in.

このステップの材料:

工具鋼丸棒工具鋼丸棒1 個

必要な工具:

鍛冶炉鍛冶炉
金床金床
ハンマーハンマー
鍛冶やっとこ鍛冶やっとこ
4

Forge the boring tools

Draw three blanks to a long tapering end and bend the extreme tip to the left (fig. 23).

このステップの材料:

工具鋼丸棒工具鋼丸棒1 個

必要な工具:

鍛冶炉鍛冶炉
金床金床
ハンマーハンマー
鍛冶やっとこ鍛冶やっとこ
5

Harden and temper

Carbon tool steel: harden the ends (ours: cherry red into water) and temper in the yellows. Self-hardening steel must never be quenched in water.

このステップの材料:

水水1 個
エメリー布エメリー布1 個

必要な工具:

鍛冶炉鍛冶炉
バケツバケツ
6

Grind the cutting-off tool

Give it front and side clearance of 3-5 degrees and little top rake. For larger work grind a round groove in the facing edge so the chip splits into two strings.

必要な工具:

卓上グラインダー卓上グラインダー
7

Grind the boring points

Grind one boring tool as a diamond point, one as a small square point that works into corners, and one as a 60 degree thread point. Rake 3-10 degrees for iron and steel, little or none for brass and copper; hone the edges.

必要な工具:

卓上グラインダー卓上グラインダー
砥石砥石
8

Troubleshooting

Lathe tool troubleshooting.

Flow

Loading...
9

History and honest limits

From Robert Gibson Griswold, "Tool Making for Amateurs" IV, **Amateur Work** (Boston), vol. IV (1904-05), pp. 23-26 and figs. 11-25 (checked on the archive.org scan amateurwork04bostrich). He shows a full set (diamond point, side, round-nose, thread, centering, brass tools); this blueprint makes the two our heads need. Stock size and quench are ours.

材料

3
  • プレースホルダー
  • 1 個
    プレースホルダー
  • プレースホルダー

必要な工具

7

CC0 パブリックドメイン

このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。

メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

ディスカッション

(0)

ログイン してディスカッションに参加

コメントを読み込み中...