アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
グリーンフューチャー
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
Tablet Weaving a Patterned Band — Card Weaving the Trim of the Viking World
Tex

作成者

Tex

2. 7月 2026FO
15
0
0
0
0

Tablet Weaving a Patterned Band — Card Weaving the Trim of the Viking World

Tablet weaving — card weaving — makes strong, richly patterned bands using nothing but square cards and thread. Each card carries four warp threads through corner holes; turning the whole pack a quarter at a time twists the warp into a dense corded band while the weft locks each turn in place. For thousands of years these bands edged cloaks, belted tunics and started the borders of larger weaves. This blueprint sets up the warp, threads the tablets, and weaves a patterned band on a simple backstrap.
中級者
4

手順

1

Measure and cut the warp

Decide the band length and cut strong wool warp threads to that length plus extra for tying off. You need four threads for every tablet, so count them out by your pattern before cutting.

このステップの材料:

Wool Yarn Skein (Undyed)Wool Yarn Skein (Undyed)1

必要な工具:

Sharp ScissorsSharp Scissors
2

Mark the tablets

Take the square weaving tablets — one hole at each corner — and mark the corners A, B, C and D on every card so you can keep them oriented the same way while threading.

必要な工具:

Weaving TabletsWeaving Tablets
3

Thread the tablets to the pattern

Thread one warp thread through each of the four holes of every tablet. The colour you put in each hole, and the direction you pass the thread (S or Z), sets the pattern the band will show.

このステップの材料:

Wool Yarn Skein (Undyed)Wool Yarn Skein (Undyed)1

必要な工具:

Weaving TabletsWeaving Tablets
4

Tension the warp on a backstrap

Gather the threaded tablets into a neat pack, tie both ends of the warp, and stretch it taut between a fixed point and a strap around your waist so the tablets stand upright and the warp is firm.

必要な工具:

Weaving TabletsWeaving Tablets
5

Weave the first pick

The four threads of each tablet make a square; the gap between the upper and lower threads is the shed. Pass the weft thread through this shed with the shuttle, leaving a short tail to secure later.

必要な工具:

Boat ShuttleBoat Shuttle
6

Turn the pack a quarter

Rotate the whole pack of tablets a quarter turn forward. This twists each set of four warps and opens a fresh shed for the next pick — the turning is what builds the pattern.

必要な工具:

Weaving TabletsWeaving Tablets
7

Pass the weft and beat

Send the weft back through the new shed and beat it firmly against the previous pick with the edge of the shuttle. Keep the band's width even by drawing the weft snug but not tight at each edge.

必要な工具:

Boat ShuttleBoat Shuttle
8

Repeat turn and weave

Continue: quarter-turn, pass the weft, beat. Each cycle advances the pattern one row and twists the warp into the firm cord that gives tablet-woven bands their strength.

必要な工具:

Weaving TabletsWeaving Tablets
Boat ShuttleBoat Shuttle
9

Reverse to relieve the twist

After many forward turns the warp behind the tablets bunches up with twist. Turn the pack backward for an equal run of picks to unwind it — this also mirrors the pattern, a normal part of the design.

必要な工具:

Weaving TabletsWeaving Tablets
10

Finish and secure the band

Weave to the end of the warp, cut the band free, and secure both ends by knotting the warp into a fringe or whipping them with weft so the band cannot unravel.

このステップの材料:

Wool Yarn Skein (Undyed)Wool Yarn Skein (Undyed)1

必要な工具:

Sharp ScissorsSharp Scissors

材料

1

必要な工具

3

接続ブループリントの材料

関連ブループリント

これらのブループリントは知識を共有しています — 技術、材料、原理

CC0 パブリックドメイン

このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。

メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

ディスカッション

(0)

ログイン してディスカッションに参加

コメントを読み込み中...