コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル

Plate Shears: Bench Shears Made from a Flat File (Shop Notes, 1919)
Bench shears for sheet metal too heavy for hand snips: a 14 in flat file, ground and sharpened, works as a lever knife bolted against a fixed cutter forged from scrap steel and fastened to the bench.
Source: Popular Mechanics Shop Notes for 1919, p. 3271. Unknown: cutter and bolt sizes. Picture: the book's photo and drawing.
中級者
Unknown
手順
1
1
Make the moving knife
Make the moving knife
Take a 14 in flat file. Grind one side smooth and sharpen part of the tip and one edge. Heat it cherry red and punch the bolt hole.
このステップの材料:
金工ヤスリ1 14 in flat file必要な工具:
卓上グラインダー
鍛冶炉
火ばさみ
熱間ポンチ
ハンマー2
2
Forge the fixed cutter
Forge the fixed cutter
Forge the fixed cutter from part of an old plowshare or other suitable scrap steel, bent as in the drawing so it can be screwed to the bench, with a hole for the pivot bolt.
このステップの材料:
炭素鋼棒(0.6 % C)1 scrap steel必要な工具:
鍛冶炉
火ばさみ
ハンマー
熱間ポンチ3
3
Assemble on the bench
Assemble on the bench
Screw the fixed cutter to the bench and bolt the file knife to it. Use a locknut on the bolt, or rivet the end over.
このステップの材料:
六角ボルト - 強度区分 8.81 個
六角ナット2 nut and locknut
木ねじ1 個必要な工具:
モンキーレンチ
マイナスドライバー材料
5- 1 14 in flat fileプレースホルダー
- 1 scrap steelプレースホルダー
- プレースホルダー
- 2 nut and locknutプレースホルダー
- 1 個プレースホルダー
この設計図で作るもの
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。
