コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル

Sagger: a Fireclay Box Moulded Round a Wooden Mould (Bourry, 1911)
The kiln box that shields ware from flame and soot: a fireclay-and-grog slab beaten flat, rolled round a wooden mould for the wall, joined to a slab bottom by hand, then dried and burned. Saggers stack in piles with wads of soft fireclay between.
Usually oval, sometimes square or rectangular; size to suit the ware.
Source: Emile Bourry, A Treatise on Ceramic Industries (1911), pp. 233, 352-356. Unknown: proportions, sizes, firing temperature. Picture: Fig. 173 of the book.
中級者
Unknown
手順
1
1
Make the body
Make the body
Mix fireclay with as much grog as possible, of fairly coarse grain, coarse and fine together, into a firm body. Not given: proportions.
このステップの材料:
耐火粘土1 個
シャモット(焼成陶片の粉砕物)1 個
水1 個必要な工具:
木のかい2
2
Beat out the slabs
Beat out the slabs
Dust a table with grog and fix four rules on it as thick as the slab. Mould slabs of the body by hand between them, firm enough to be shaped roughly by striking with a wooden bat, then smooth them.
必要な工具:
シャモット(焼成陶片の粉砕物)
不明な材料
木のかい
めん棒3
3
Form the sagger
Form the sagger
Roll a slab round a wooden mould whose outside is the inside shape of the sagger. Stand the mould on a second slab for the bottom and join the two by hand. Strike the body so it lengthens slightly and comes loose, and draw the mould off upward.
必要な工具:
不明な材料
木のかい4
4
Dry and burn
Dry and burn
Dry it slowly, then burn it as fireclay goods are burned. In use, stack saggers in piles with wads of thin fireclay between them to seal and steady them.
必要な工具:
窯接続ブループリントの材料
この設計図で作るもの
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

