コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
Scraper: a Hand Scraper Forged from Octagon Steel (Holford, 1907)
A hand scraper takes paint and grease off boiler plate, cast iron or any other material and leaves a bright, smooth surface. Frederick Holford's 20th Century Toolsmith (1907) forges one from 5/8-inch octagon tool steel: the end is drawn perfectly flat, 1/8 inch thick, about 3 inches long and 1 inch wide, with the end left square so its corners do the cutting. It is hardened hard and no temper is drawn.
The overall length of the bar is not given; that is unknown here.
Source: F. J. Holford, The 20th Century Toolsmith and Steelworker (1907), pp. 176-177 and p. 21 (the hardening bath). Picture: his Fig. 107.
中級者
An hour
手順
1
1
Read Holford
Read Holford
"A scraper for taking off paint, grease, etc., off boiler plate or any other material and leave a bright smooth surface, is chiefly made from octagon steel ... for an ordinary scraper 5/8 octagon will do."
2
2
Forge the blade flat
Forge the blade flat
Choose octagon steel to suit the width of scraper wanted; 5/8 inch does for an ordinary one. Forge the end perfectly flat, 1/8 inch thick, about 3 inches long and 1 inch wide, and leave the end perfectly square. The length of the bar left for a handle is not given (unknown).
このステップの材料:
工具鋼八角棒1 bar必要な工具:
鍛冶炉
金床
鍛冶ハンマー
鍛冶やっとこ
不明な寸法3
3
Harden, no temper
Harden, no temper
Heat about 1 inch back from the scraping edges and quench in the hardening bath, then cool the whole tool. Holford's bath (p. 21) is clean water free from grease, best made a brine with as much salt as it will dissolve, large and cold. Draw no temper: the tool must be very hard.
必要な工具:
鍛冶炉鍛冶やっとこ
飽和食塩水
耐熱手袋4
4
Grind the corners
Grind the corners
Grind the square end so its corners are very sharp: the corners are the scraping edges.
必要な工具:
回転砥石5
5
History and honest limits
History and honest limits
Holford says the scraper "will give excellent results if properly forged, hammered and hardened". The same hard, untempered scraper is the tool used to bring metal surfaces true by scraping off high spots.
The overall length of the bar is not given.
この設計図で作るもの
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。