アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
The Finger-Valve Fountain Bath Brush: Press to Run, Let Go to Stop
A bath brush fed from a hose runs all the time, or needs a tap out of reach.
Daniel S. Koons and William F. Moughler of Chicago received US 634,527, dated 10 October 1899, for "a fountain bath-brush": a false back with a water passage, joined to the brush by a hollow screw whose perforated head lets the water out among the bristles, with a valve that a spring and the water pressure hold shut until a finger presses its stem, and a strap that holds the hand to the brush.
This rung works out the finger force, then builds the false back on a scrub brush with a tyre valve as the finger valve, and measures the force and the flow.
中級者
About 3 hours
手順
1
1
Force to open the valve
Force to open the valve
Jupyter ノートブックを読み込み中…
2
2
A brush that feeds itself before it
A brush that feeds itself before it
The embedded blueprint feeds soap from inside a shaving brush. Koons and Moughler feed water, and give the finger a valve to start and stop it.
3
3
Read US 634,527
Read US 634,527
"Said valve is held normally closed by means of a spring 9 and also by the water-pressure, as will be obvious."
"A strap k is secured at the sides of said back B' and passes over the latter, so that by inserting the hand between said back B' and said strap k the brush can be firmly held and the fingers at the same time kept in position to operate the valve."
4
4
Bore the false back
Bore the false back
Cut a hardwood block 120 × 50 × 22 mm. Drill a 6 mm passage 90 mm along its centre from one end, and a 6 mm hole down from the top to meet it 30 mm from the far end.
このステップの材料:
堅木のブロック1 個必要な工具:
万力（ベンチバイス）
コードレスドリル
中心針錐先セット
定規
透明保護メガネ5
5
Fit the finger valve
Fit the finger valve
Drill a hole across the passage 20 mm from the inlet to take a tyre valve, pin upward. Epoxy it in so the water must pass through it.
このステップの材料:
タイヤバルブ1 個
二液性エポキシ1 個必要な工具:
コードレスドリル
ドリルビットセット6
6
Join it to the brush
Join it to the brush
Drill a 6 mm hole through the scrub brush's back to line up with the outlet. Cut a rubber gasket, and screw the block on with four wood screws.
このステップの材料:
たわし1 個
ゴムシート1 個
#8 × 1 インチ木ねじ1 個必要な工具:
コードレスドリルドリルビットセット
クラフトナイフ
ドライバーセット7
7
Strap and hose
Strap and hose
Screw a strip of rubber sheet across the block as a hand strap, over the valve's side. Fit a hose connector to the inlet with brass fittings and PTFE tape.
このステップの材料:
ゴムシート1 個#8 × 1 インチ木ねじ1 個
真鍮継手1 個
PTFE ねじシールテープ1 個必要な工具:
ドライバーセット
モンキーレンチ8
8
The patent drawing
The patent drawing
US 634,527 drawing sheet, public domain (expired patent).
9
9
Measure force and flow
Measure force and flow
Connect the garden hose and turn on the tap. Press the valve pin with the force meter's hook until water runs; note the force. Hold it open over the jug for 30 s and read the flow.
このステップの材料:
水1 個必要な工具:
ばねばかり（力計）
計量ジャグ
ストップウォッチ
散水ホース10
10
A valve that drips, sticks or barely flows
A valve that drips, sticks or barely flows
Finger-valve bath brush troubleshooting.
Flow
Loading...
11
11
History and honest limits
History and honest limits
**Daniel S. Koons** and **William F. Moughler** of Chicago filed US 634,527 on 21 September 1898; it is dated 10 October 1899. They called it a self-cleansing brush. Its handle is telescopic, with a stuffing-box between the two members, and the hose can be led through it to the brush; a second form uses a nozzle as the screw joining the backs. They did not limit it to the bath.
**Honest limits.** A tyre valve stands in for their seated valve and stem, and wood screws for their hollow screw. Your forces and flows are the result.
材料
9- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- プレースホルダー
- 1 個プレースホルダー
- プレースホルダー
- 1 個プレースホルダー
関連ブループリント
これらのブループリントは知識を共有しています — 技術、材料、原理
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。