アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
The States of Clay: Five Conditions, and What Each One Will Let You Do
Clay

作成者

Clay

24. 9月 2026DK
36
0
0
0
0

The States of Clay: Five Conditions, and What Each One Will Let You Do

Clay is not one material. It passes through five distinct conditions on its way to being a pot, and each one allows some operations and forbids others — so almost every question in pottery begins with "what state is it in?" SLIP is liquid, for joining and decorating. PLASTIC is workable, for forming. LEATHER-HARD holds its shape but can still be cut, for trimming and handles. BONE DRY is brittle and can only be fired. FIRED is permanent and nothing can be undone. The transitions are one-way in the sense that matters: the first four can be reversed with water, and the fifth cannot be reversed at all. Everything before the kiln is recoverable, and that is worth knowing while learning.
初心者
3 hours

手順

1

What each state is for

PLASTIC clay takes a shape and holds it. Throwing, pinching, coiling and slab building all happen here, and so does joining — the clay is wet enough that two pieces scored and slipped together actually knit. LEATHER-HARD is the state people underuse. It is firm enough to pick up and turn over, soft enough to carve, trim and cut cleanly. Handles are attached here, feet are trimmed here, and carved decoration is done here because it does not smear. BONE DRY is pale, cool to the touch, and extremely fragile. Nothing can be done except sponging the sharpest edges and loading the kiln. Clay that still feels COLD against your cheek is not bone dry, however dry it looks — and firing it wet is the other way pots explode.

このステップの材料:

粘土粘土2 kg
水水1 リットル

必要な工具:

陶芸道具セット陶芸道具セット
木のこて(ろくろ用)木のこて(ろくろ用)
スポンジスポンジ
2

Shrinkage: how much smaller it gets, and when

Jupyter ノートブックを読み込み中…

このステップの材料:

粘土粘土1 kg
低火度陶土低火度陶土1 kg

必要な工具:

定規定規
デジタルノギス 6インチデジタルノギス 6インチ
デスクトップパソコンデスクトップパソコン
陶芸道具セット陶芸道具セット
3

Slow the drying down, and slow the edges down most

A pot dries from the outside in and from the rim down, because those parts are most exposed. Thin rims, handles and feet dry first, shrink first, and are held back by the wetter body they are attached to — which is exactly how cracks start. So cover the work loosely with plastic and let it dry SLOWLY and evenly. A day or two under plastic, then a day in the open, beats a morning in a draught every time. Cover the parts that would otherwise race ahead. A strip of plastic over just the rim, or over the handles, lets the thick body catch up — which is the same principle as the thin-bits-burn-first problem in the forge.

このステップの材料:

粘土粘土1 kg

必要な工具:

陶芸用のキャンバス作業面陶芸用のキャンバス作業面
スポンジスポンジ
4

Joining: score, slip, and only while plastic

Two pieces of clay join properly only when both are the same state and wet enough for their particles to interlock. Score both faces with cross-hatching, wet them with slip made from the SAME clay body, press together and work the seam. Slip from a different body is a common and avoidable mistake: two bodies shrink by different amounts, so the joint is pulling itself apart from the moment it dries. A handle attached to a leather-hard pot is the classic failure. The pot has done most of its drying shrinkage and the handle has not, so the handle shrinks onto a body that cannot move and cracks at the join. Attach at the same state, or bring the handle back to match.

このステップの材料:

粘土粘土1 kg
水水1 リットル

必要な工具:

粘土用の目立て道具粘土用の目立て道具
陶芸道具セット陶芸道具セット
スポンジスポンジ

材料

3
  • 5 kg
    プレースホルダー
  • 2 リットル
    プレースホルダー
  • プレースホルダー

必要な工具

8

CC0 パブリックドメイン

このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。

メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

ディスカッション

(0)

ログイン してディスカッションに参加

コメントを読み込み中...