コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
Wash Bottle: a Laboratory Wash Bottle with a Slit Valve (Boy Mechanic, 1915)
Charlie

作成者

Charlie

4. 11月 2026DE
15
0
0
0
0

Wash Bottle: a Laboratory Wash Bottle with a Slit Valve (Boy Mechanic, 1915)

A wide-mouthed bottle with a three-tube stopper that squirts a steady stream of water for rinsing glassware and washing precipitates. Blow into one tube to pressurise it; a slit rubber valve holds the pressure, and your thumb on a relief tube starts and stops the jet at once. Source: The Boy Mechanic, Book 2 (1915), p. 458. Unknown: sizes. Picture: the book's sketch.
初心者
Unknown

手順

1

Bore the stopper

Fit a stopper to a large-mouthed bottle and bore three holes through it for the tubes.

このステップの材料:

ガラス瓶(無色透明)ガラス瓶(無色透明)1 large mouth
ゴム栓ゴム栓1 個

必要な工具:

コルクボーラーコルクボーラー
2

Make the tubes

Use brass or glass tubes. Bend the nozzle tube E so it reaches the bottom and points out over the side (sketch); the air tube A and relief tube D only pass through the stopper.

このステップの材料:

ガラス管ガラス管3 個

必要な工具:

卓上ガラス吹きバーナー卓上ガラス吹きバーナー
3

Fit the slit valve

On the lower end of air tube A fit a thick piece of rubber tubing B, stoppered at its bottom end, and cut a slit C in its side: blown air opens it, and it closes again to hold the pressure. Push the three tubes through the stopper and fit it in the bottle. To use: fill with water, blow into A, then close D with your thumb; water jets steadily from E and stops the moment the thumb lifts.

このステップの材料:

ゴム管ゴム管1 thick, short piece

必要な工具:

クラフトナイフクラフトナイフ

材料

4

必要な工具

3

CC0 パブリックドメイン

このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。

メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

ディスカッション

(0)

ログイン してディスカッションに参加

コメントを読み込み中...