コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
Wedging Table: Plaster-Topped with a Cutting Wire (Binns, 1910)
Woody

作成者

Woody

4. 11月 2026NO
9
0
0
0
0

Wedging Table: Plaster-Topped with a Cutting Wire (Binns, 1910)

The potter's wedging table Binns taught: a strong table with a 30 by 20 in top of two-inch plank, edged to make a trough filled with plaster, and a fine brass wire stretched diagonally from a post on one side for cutting the clay. Clay is cut on the wire and slapped down on the plaster, fifteen or twenty times, until it is even; wet the plaster if it stiffens the clay too fast. Source: C. F. Binns, The Potter's Craft (1910), p. 79. Picture: the book's text.
初心者
Unknown

手順

1

Make the top

Build a strong table whose top, about 30 by 20 in, is of two-inch plank. Nail a raised edge 2 in high firmly to the sides to form a trough.

このステップの材料:

製材板製材板1 two-inch plank, about 30 x 20 in
板板1 raised edge, 2 in high
鉄釘鉄釘1 個

必要な工具:

手のこぎり手のこぎり
ハンマーハンマー
2

Pour the plaster

Fill the trough with plaster and let it harden.

このステップの材料:

焼石こう焼石こう1 個

必要な工具:

ハンマーハンマー
3

Fit the post and wire

Fasten an upright post in the centre of one side and stretch a fine brass wire from its top to the other side of the table, making a diagonal. The worker stands on the side opposite the post.

このステップの材料:

不明な材料不明な材料1 upright post, material not given
細い真鍮線細い真鍮線1 fine brass wire
鉄釘鉄釘1 個

必要な工具:

ハンマーハンマー
手のこぎり手のこぎり

材料

6
  • 1 two-inch plank, about 30 x 20 in
    プレースホルダー
  • 1 raised edge, 2 in high
    プレースホルダー
  • 2 個
    プレースホルダー
  • プレースホルダー
  • 1 upright post, material not given
    プレースホルダー
  • 1 fine brass wire
    プレースホルダー

必要な工具

2

この設計図で作るもの

CC0 パブリックドメイン

このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。

メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

ディスカッション

(0)

ログイン してディスカッションに参加

コメントを読み込み中...