Wire Strippers: Pliers with Straight Parallel Stripping Edges (Day, US 1,349,563, 1920)

Pliers whose jaws stop with their two straight stripping edges exactly one wire-core apart. Grip the wire anywhere along the edges and twist: the insulation is cut through all round, but the copper is never nicked. A screw stop between the handles sets the gap for larger wire, and cutting edges beside the stripping edges cut the wire through. Result: wire strippers that strip insulation without damaging the conductor. Source: C. T. Day, US 1,349,563 (1920). Unknown: the metal, sizes and hardening. Picture: the patent drawing.

中級者

Unknown

手順

Forge the two jaw-handles

Make two pieces like a pair of pliers: each a jaw with a long handle, pivoted together by a bolt. Bend each jaw's end inward. Ours: tool steel forged and filed. Not given: the metal, sizes.

このステップの材料:

工具鋼平角棒1 jaws and handles

不明な金属1 pivot bolt

必要な工具:

鍛冶炉

金床

ハンマー

ボール盤

不明な寸法

Shape the cheek pieces and stripping edges

Give each inward jaw end a cheek piece; the cheek faces meet when the jaws close and stop them closing further. Set back from those faces, file two straight, parallel stripping edges, much longer than the gap between them, so that with the jaws shut they stand apart by exactly the diameter of the wire's metal core. On the other side of the stripping edges, opposite the cheeks, file cutting edges that meet, for cutting the wire through.

必要な工具:

金工ヤスリ

不明な寸法

Add the stop, harden, and strip a wire

For use on a larger wire, drill and tap a hole in one handle and fit a stud with a hand piece and a threaded end. Screwed in, its free end meets the other handle and stops the jaws closing so far. A lock nut holds the setting. Harden the edges. To strip, lay the wire across the jaws anywhere along the stripping edges, close them and turn the pliers right and left with the wrist: the insulation is cut through all round, and a pull slides its end off the core. Not given: how they are hardened.

このステップの材料:

不明な金属1 stud and lock nut

必要な工具:

ボール盤