SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Billhook Forged from Tool Steel with an Ash Handle
TrewTrewornan · CC BY-SA 3.0
Forge

Imeundwa na

Forge

14. Oktoba 2026NO
22
0
0
0
0

Billhook Forged from Tool Steel with an Ash Handle

The billhook is the hedgelayer's and coppicer's blade for saplings and small branches. The blade is straight by the handle and curves more and more toward the end, and it is sharpened on the inside of the curve. Forge a 20–25 cm blade with a tang, harden and temper it, and fit an ash handle. The picture: a Devon pattern billhook made by W. Gilpin in 1918.
Kati
A day

Maagizo

1

Draw the tang

Heat the bar and draw a tapered tang at one end, a little longer than the handle.

Vifaa kwa hatua hii:

Kipande bapa cha feleji ya zanaKipande bapa cha feleji ya zana1 kipande

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
FuaweFuawe
Nyundo yenye kichwa cha msalabaNyundo yenye kichwa cha msalaba
Koleo za mhunziKoleo za mhunzi
Glavu za kulehemuGlavu za kulehemu
Miwani ya usalamaMiwani ya usalama
2

Forge the hook

Draw the blade to 20–25 cm and thin it toward the edge side. Curve the end over the horn, straight near the handle and curving more toward the tip.

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
FuaweFuawe
Nyundo yenye kichwa cha msalabaNyundo yenye kichwa cha msalaba
Koleo za mhunziKoleo za mhunzi
Glavu za kulehemuGlavu za kulehemu
Miwani ya usalamaMiwani ya usalama
3

File the edge

Let it cool slowly in the ashes, then file a bevel on the inside of the curve only. Keep it fairly thick so it does not bind in green wood.

Zana zinazohitajika:

Tupa ya chumaTupa ya chuma
4

Harden and temper

Heat the blade to cherry red and quench in water. Polish it bright, then warm the back and quench again when the edge turns purple, tougher than a knife.

Vifaa kwa hatua hii:

MajiMaji10 lita

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
Ndoo ya kupoza chumaNdoo ya kupoza chuma
Koleo za mhunziKoleo za mhunzi
Glavu za kulehemuGlavu za kulehemu
Miwani ya usalamaMiwani ya usalama
5

Ash handle

Saw and shave an ash handle 12–15 cm long. Drill it, burn the hot tang in, and peen the tang end over the butt. Oil the handle.

Vifaa kwa hatua hii:

Kipande cha mti wa ashKipande cha mti wa ash1 kipande
Mafuta ya KitaniMafuta ya Kitani0.02 lita

Zana zinazohitajika:

Msumeno wa mkonoMsumeno wa mkono
Kisu cha KuvutaKisu cha Kuvuta
Kekee cha mkonoKekee cha mkono
Fua ya mhunziFua ya mhunzi
Nyundo yenye kichwa cha msalabaNyundo yenye kichwa cha msalaba
Koleo za mhunziKoleo za mhunzi
6

Sharpen

Hone the bevel on the stone and take the burr off the flat side.

Zana zinazohitajika:

Jiwe la kunoa la grit 1000Jiwe la kunoa la grit 1000
7

Edge angle

Inapakia daftari la Jupyter…

Vifaa

4

Zana Zinazohitajika

12

Mchoro huu unatengeneza

Thumbnail
Kishikilia nafasi

Mundu mzito

Free

110
0

Blueprint zinazohusiana

Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni

Sloyd Carving Knife Forged from Tool Steel

Sloyd Carving Knife Forged from Tool Steel

na ForgeNO

Mhunzi

18
0
0
0
0
0
Secateurs: Forged Bypass Pruning Shears with a Spring and Catch

Secateurs: Forged Bypass Pruning Shears with a Spring and Catch

na ForgeNO

Mhunzi

12
0
0
0
0
0

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...