Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Cartridge Belt: Wide Leather Belt With a Woven Strip Forming the Loops (Boy Mechanic, 1915)
Tex

Imeundwa na

Tex

13. Novemba 2026FO
4
0
0
0
0

Cartridge Belt: Wide Leather Belt With a Woven Strip Forming the Loops (Boy Mechanic, 1915)

Robert Pound of Lavina, Montana, sent this cartridge belt to The Boy Mechanic, Book 2 (1915): a leather belt about 2-1/2 in wide with a 1 in strip woven through pairs of slits to form a row of loops. Using the strip's free end in the buckle lets the loops be tightened for different sizes.
Mwanzo
About 2 hours

Maagizo

1

His sizes, and how many loops

Inapakia daftari la Jupyter…
2

Read The Boy Mechanic, Book 2

"Procure a leather belt, about 2-1/2 in. wide and long enough to reach about the waist, also a piece of leather, 1 in. wide and twice as long as the belt."
3

Cut the belt and strip

Cut a leather belt about 2-1/2 in wide and long enough to go round the waist, and a strip 1 in wide and twice as long as the belt. Fix a buckle to one end of the belt and rivet one end of the strip to the belt near the buckle.

Vifaa kwa hatua hii:

Ngozi ya vifaa vya farasiNgozi ya vifaa vya farasi2 vipande
Bakoli ya chuma yenye ulimiBakoli ya chuma yenye ulimi1 kipande
Rivet za shabaRivet za shaba1 kipande

Zana zinazohitajika:

Kisu cha ngoziKisu cha ngozi
Kitoboa ngoziKitoboa ngozi
NyundoNyundo
Tepi ya kupimiaTepi ya kupimia
4

Weave the loops

Cut two slits in the belt, a cartridge's diameter apart. Pass the strip through one slit and back through the other to make a loop. About 1/4 in further on, cut two more slits and form the next loop the same way, and so on along the whole belt.

Zana zinazohitajika:

Kisu cha ngoziKisu cha ngozi
Tepi ya kupimiaTepi ya kupimia
PenseliPenseli
5

Finish the end

Rivet the end of the strip to the belt, or take it into the buckle: then the strip can be drawn up to fit cartridges of different sizes. Punch the holes for the buckle tongue.

Vifaa kwa hatua hii:

Rivet za shabaRivet za shaba1 kipande

Zana zinazohitajika:

Kitoboa ngoziKitoboa ngozi
NyundoNyundo
6

Troubleshooting

Cartridge belt troubleshooting.

Flow

Loading...
7

History and honest limits

From "How to Make a Cartridge Belt" by Robert Pound, Lavina, Mont., in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 55). He gives no slit length and no cartridge size; the slit spacing follows whatever cartridge the belt is for. The tools and metric figures are ours.

Vifaa

3

Zana Zinazohitajika

5
  • Kishikilia Nafasi
  • Kishikilia Nafasi
  • Kishikilia Nafasi
  • 1 vendor sell this, none ship to you yet
    Kishikilia Nafasi
  • 1 vendor sell this, none ship to you yet
    Kishikilia Nafasi

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...