Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Leather Punch from an Old Pipe Nipple: Edge Ground Thin, Slug Slot Cut Above (Boy Mechanic, 1915)
Forge

Imeundwa na

Forge

15. Novemba 2026NO
5
0
0
0
0

Leather Punch from an Old Pipe Nipple: Edge Ground Thin, Slug Slot Cut Above (Boy Mechanic, 1915)

A shop-made hollow punch for round holes in leather from The Boy Mechanic, Book 2 (1915): an old pipe nipple of the size you need, one end ground on the outside to a very thin cutting edge, and a small slot a little above it to push the leather slugs out.
Mwanzo
Half an hour

Maagizo

1

Read the tip

"The cutter end can be ground very thin to prevent an over-cut, while a small slot cut a little above it will allow the removal of the leather slugs."
2

Choose the pipe

Pick an old pipe nipple whose bore matches the hole you want: pieces of almost any size turn up around a shop. If the piece is long, saw it to a handy length (ours).

Vifaa kwa hatua hii:

Bomba la chuma (ukuta mnene, ncha zenye nyuzi)Bomba la chuma (ukuta mnene, ncha zenye nyuzi)1 kipande

Zana zinazohitajika:

Kibano cha meza ya kaziKibano cha meza ya kazi
Msumeno wa chumaMsumeno wa chuma
3

Grind the cutter end

Grind one end on the outside to a long bevel, leaving a very thin edge round the bore, as the hatched section in the sketch shows. Keep turning the pipe so the edge stays even.

Zana zinazohitajika:

Kisagia cha mezaKisagia cha meza
4

Cut the slug slot

A little above the edge, cut a small slot through the wall (the sketch shows a triangle) to push the slugs out. Ours: drill a hole and file it to shape.

Zana zinazohitajika:

Kibano cha meza ya kaziKibano cha meza ya kazi
Kekee cha NguzoKekee cha Nguzo
Tupa (Tupa ya Mkono)Tupa (Tupa ya Mkono)
Tupa za sindanoTupa za sindano
5

Punch

Ours: lay the leather on end-grain wood, stand the punch upright and strike the top with a mallet. Poke the slugs out through the slot.

Zana zinazohitajika:

Nyundo ya mbaoNyundo ya mbao
6

Troubleshooting

Punch troubleshooting.

Flow

Loading...
7

History and honest limits

From "Pipe Used as a Leather Punch", **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 138 (checked on the archive.org scan boymechanicbook200chic2). The note gives no sizes; the way the slot is cut, the length and the striking method are ours.

Vifaa

1

Zana Zinazohitajika

7

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...