Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Woven-Top Stool: Mortised, Braced Frame With a Diagonal Reed Seat (Boy Mechanic, 1915)
Woody

Imeundwa na

Woody

13. Novemba 2026NO
8
0
0
0
0

Woven-Top Stool: Mortised, Braced Frame With a Diagonal Reed Seat (Boy Mechanic, 1915)

Russel Dodsworth's stool from The Boy Mechanic, Book 2 (1915): a 17-1/2 in square mortise-and-tenon frame with corner braces, its top woven from wet reed in two layers, the second laid over-three-under-three so a diagonal pattern runs across the seat.
Kati
About 2 days

Maagizo

1

His cutting list, and the weave

Inapakia daftari la Jupyter…
2

Read The Boy Mechanic, Book 2

The material: 4 legs, 1-3/4 by 1-3/4 by 16 in; 4 bottom rails, 7/8 by 1-3/4 by 16 in; 4 top rails, 7/8 by 2 by 16-1/2 in; 4 diagonal braces, 7/8 by 1-3/4 by 6 in.
3

Cut and mortise the frame

Cut the parts to his list. Mortise the legs so the top rails come level; tenon the top rails on the sides only and bevel them at the ends. For the bottom rails, cut the mortises one above the other (5 in above the floor on his drawing) and tenon the rails on all sides. Cut the braces at 45 deg on each end.

Vifaa kwa hatua hii:

Ubao wa Mti MgumuUbao wa Mti Mgumu4 vipande

Zana zinazohitajika:

Msumeno wa mkonoMsumeno wa mkono
PatasiPatasi
Nyundo ya mbaoNyundo ya mbao
Randa ya mkonoRanda ya mkono
PenseliPenseli
Tepi ya kupimiaTepi ya kupimia
4

Glue up

Glue the frame together and glue the diagonal braces in place inside the top corners.

Vifaa kwa hatua hii:

Gundi ya MbaoGundi ya Mbao1 kipande

Zana zinazohitajika:

Kibano cha upauKibano cha upau
Nyundo ya mbaoNyundo ya mbao
5

Wrap the first layer

Use a wet reed weaver and wrap one layer over the whole top, the strips close together and tightly wound.

Vifaa kwa hatua hii:

HenziraniHenzirani1 kipande

Zana zinazohitajika:

Ndoo ya Lita 20Ndoo ya Lita 20
Kisu cha ngoziKisu cha ngozi
6

Weave the second layer

Start the second layer at right angles to the first. Strip 1: under one, then over three, under three, and so on by threes. Strip 2: under two, then over three, under three. Strip 3: under three, then over and under three. Strip 4: over one, then under three, over three. Strip 5: over two, then under and over three. Strip 6: over three, then by threes. Repeat the series of six across the top.

Vifaa kwa hatua hii:

HenziraniHenzirani1 kipande

Zana zinazohitajika:

Ndoo ya Lita 20Ndoo ya Lita 20
Kisu cha ngoziKisu cha ngozi
7

Finish

Good white shellac makes the best finish for the seat; finish the frame to suit.

Vifaa kwa hatua hii:

Vanishi ya shelakiVanishi ya shelaki1 kipande

Zana zinazohitajika:

Brashi pana ya rangiBrashi pana ya rangi
8

Troubleshooting

Stool troubleshooting.

Flow

Loading...
9

History and honest limits

From "Woven-Top Stool" by Russel Dodsworth, Erie, Pa., in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 256). His caption names the weaver as reed; he gives no reed size or tenon lengths. Rattan reed as the weaver, the tools and metric figures are ours.

Vifaa

4

Zana Zinazohitajika

10

Mchoro huu unatengeneza

Blueprint zinazohusiana

Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...