SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Butyraldehyde: Butyl Alcohol Dehydrogenated over Copper Pellets at 400-680 °F (Hasche, Eastman, US 2,173,111)
Charlie

Imeundwa na

Charlie

31. Oktoba 2026DE
0
0
0
0
0

Butyraldehyde: Butyl Alcohol Dehydrogenated over Copper Pellets at 400-680 °F (Hasche, Eastman, US 2,173,111)

Hot copper pulls two hydrogen atoms off butyl alcohol and leaves butyraldehyde. Hasche's catalyst is copper made from blown, water-quenched cuprous oxide, in dust-free pellets that can be burnt clean and reduced again when they tire. Result: butyraldehyde, distilled off from the unchanged alcohol. Source: Hasche, US 2,173,111 (Eastman Kodak, 1939), claims 6, 9 and 12. His worked run is for propyl alcohol; conversion for butanol is not given. Picture drawn by Youblob.
Juu
1 day

Maagizo

1

Pack the copper catalyst

Fill a tube with dust-free copper pellets made from cuprous oxide blown from molten copper and quenched in water (2-5 mesh in claim 17).

Zana zinazohitajika:

Vidonge vya kichocheo cha shabaVidonge vya kichocheo cha shaba
Tanuru ya MrijaTanuru ya Mrija
2

Preheat the butyl alcohol

Vaporise and preheat the butyl alcohol to about 500-600 °F.

Vifaa kwa hatua hii:

n-Butanoln-Butanol1 as required

Zana zinazohitajika:

Tanuru ya MrijaTanuru ya Mrija
3

Pass it over the copper at 400-680 °F

Lead the hot vapour over the catalyst held at about 400-680 °F. It splits into butyraldehyde and hydrogen; part of the alcohol passes unchanged.

Zana zinazohitajika:

Vidonge vya kichocheo cha shabaVidonge vya kichocheo cha shaba
Tanuru ya MrijaTanuru ya Mrija
Koili ya kifidishajiKoili ya kifidishaji
4

Distil off the aldehyde

Condense the products and distil: butyraldehyde comes over first (it boils near 74 °C); distil the alcohol back in the presence of alkali and return it.

Zana zinazohitajika:

Chombo cha kunereka kwa sehemuChombo cha kunereka kwa sehemu
Hidroksidi ya sodiamu, myeyusho wa asilimia 10Hidroksidi ya sodiamu, myeyusho wa asilimia 10
5

Reactivate the spent copper

When the catalyst slows, flush it, oxidise it at about 600-800 °F, cool, and reduce it again with alcohol vapour at about 300-400 °F.

Zana zinazohitajika:

Vidonge vya kichocheo cha shabaVidonge vya kichocheo cha shaba
Tanuru ya MrijaTanuru ya Mrija

Vifaa

1
  • 1 as required
    Kishikilia Nafasi

Zana Zinazohitajika

5

Blueprint zinazohusiana

Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...