SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Spring Scale Calibrated with Known Weights
A spring scale, or newton meter, is a spring fixed at one end with a hook at the other. By Hooke's law the stretch grows in step with the force, so the marks on its scale are evenly spaced. This one is built in a clear tube with a paper scale and calibrated with known weights: on Earth a 100 g mass pulls with about 0.98 N (100 g × 9.81 m/s²). The sizes here are ours: a tube about 20 cm long and a light extension spring that stretches clearly under 1 kg. Do not load it past the heaviest calibration weight: an overstretched spring stays longer and the scale is lost.
Mwanzo
2 hours
Maagizo
1
1
Make the hooks
Make the hooks
Bend two pieces of steel wire with round-nose pliers: one with a loop at each end to hang the spring from the top plug, one long rod with a loop at the top and a hook at the bottom.
Vifaa kwa hatua hii:
Waya wa chuma0.4 mZana zinazohitajika:
Koleo lenye Ncha za Duara2
2
Plug the tube
Plug the tube
Push the top wire through one cork disc and glue the disc into the top of the tube. Make a hole in the second disc for the rod to slide through and glue it into the bottom.
Vifaa kwa hatua hii:
Bomba la akriliki (wazi)1 kipande
Kipande kidogo cha mviringo cha kizibo2 vipande
Gundi ya Papo Hapo (sianoakrilati)1 kipandeZana zinazohitajika:
Kisu cha kazi za mikono3
3
Hang the spring
Hang the spring
Hook the spring to the top loop and the rod's top loop to the spring, so the rod hangs out through the bottom plug. The lower end of the spring is the pointer.
Vifaa kwa hatua hii:
Springi ya kuvuta1 kipande4
4
Fit the scale
Fit the scale
Glue a strip of graph paper along the outside of the tube and mark zero at the spring's lower end with nothing hanging.
Vifaa kwa hatua hii:
Karatasi ya gridi1 kipandeZana zinazohitajika:
Kalamu ya Wino wa Kudumu5
5
Calibrate
Calibrate
Hang 100 g, 200 g and so on up to 1 kg, marking the pointer each time; each 100 g is about 0.98 N. The marks should be evenly spaced; check that the pointer returns to zero when unloaded.
Zana zinazohitajika:
Seti ya vipimo vya urekebishajiVifaa
6- 0.4 mKishikilia Nafasi
- 1 kipandeKishikilia Nafasi
- Kishikilia Nafasi
- 1 kipandeKishikilia Nafasi
- 1 kipandeKishikilia Nafasi
- 1 kipandeKishikilia Nafasi
Zana Zinazohitajika
4- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
Mchoro huu unatengeneza
Blueprint zinazohusiana
Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni
CC0 Umma Wote
Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.
Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.