Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot.
Result: a set of turning tools, a turning stick and board, and ribs.
Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
Mwanzo
Unknown
Maagizo
1
1
Bend and file the turning tools
Bend and file the turning tools
Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.
Vifaa kwa hatua hii:
Pau Bapa la Chuma Laini1 turning toolsZana zinazohitajika:
Msumeno wa chuma
Nyundo
Fuawe
Tupa ya chuma2
2
Make the board and turning stick
Make the board and turning stick
Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.
Vifaa kwa hatua hii:
Ubao wa msonobari1 board support
Kigingi cha mbao1 turning stick
Misumari ya Chuma1 stick pointZana zinazohitajika:
Msumeno wa chumaTupa ya chumaNyundo3
3
Cut the ribs
Cut the ribs
Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.
Vifaa kwa hatua hii:
Ubao wa mbao gumu1 ribsZana zinazohitajika:
Msumeno wa chumaTupa ya chumaVifaa
5- 1 turning toolsKishikilia Nafasi
- 1 board supportKishikilia Nafasi
- 1 turning stickKishikilia Nafasi
- 1 stick pointKishikilia Nafasi
- 1 ribsKishikilia Nafasi
Vifaa vya Michoro Iliyounganishwa
Usambazaji 10%
Mild Steel Bar Stock Forged from an Ingot
na Forge
Kisasa
43
0
0
0
5
0
Usambazaji 10%
Pine Boards with a Chainsaw Mill
na Woody
Utengenezaji mbao
43
0
0
0
1
0
Usambazaji 10%
Riven Hardwood Dowels with a Dowel Plate
na Woody
Utengenezaji mbao
55
0
0
0
1
0
Usambazaji 10%
Forging Iron Nails by Hand — Drawing, Cutting, and Heading
na Forge
Misumari
61
0
0
0
3
0
Mchoro huu unatengeneza
CC0 Umma Wote
Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.
Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.