Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Forge-Welded Plough and Trace Chain: Links Bent, Scarfed and Welded One into the Next, with S-Hooks and a Swivel (Edwinson, 1886)
Forge

Imeundwa na

Forge

14. Novemba 2026NO
6
0
0
0
0

Forge-Welded Plough and Trace Chain: Links Bent, Scarfed and Welded One into the Next, with S-Hooks and a Swivel (Edwinson, 1886)

How a country smith made and mended farm chain, from George Edwinson's series in Amateur Work (1886): rod cut to link length plus one-third, bent hot, scarfed and forge-welded shut through the previous link; tough S-hooks for field repairs and a forged swivel link with its pin.
Kati
A few minutes per link

Maagizo

1

His rules

Inapakia daftari la Jupyter…
2

Read Edwinson

"Measure the length of a link in the chain, add one-third to this, and the total will give the required length of iron for an oval link."
3

Cut the stock

For an oval link cut rod the link length plus one-third; for a round link a little over three times its diameter. Nick the lengths off the rod (his fig. 163).

Vifaa kwa hatua hii:

Fito ya chuma cha kufuaFito ya chuma cha kufua1 kipande

Zana zinazohitajika:

Patasi ya motoPatasi ya moto
FuaweFuawe
NyundoNyundo
4

Bend and scarf

Heat the middle of a piece red, bend it into a U (fig. 164), and scarf both ends (fig. 165).

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
FuaweFuawe
NyundoNyundo
Koleo za mhunziKoleo za mhunzi
5

Weld the links

Thread the open link through the last finished link, bring it to a welding heat, close it up and weld it shut. Repeat link by link.

Vifaa kwa hatua hii:

MchangaMchanga1 kipande

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
FuaweFuawe
NyundoNyundo
Koleo za mhunziKoleo za mhunzi
6

S-hooks for repairs

Bend S-hooks (fig. 166) from tough iron and cool them slowly. A broken chain is mended in the field by bending the hook ends over the broken links (fig. 167).

Vifaa kwa hatua hii:

Fito ya chuma cha kufuaFito ya chuma cha kufua1 kipande

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
FuaweFuawe
NyundoNyundo
7

Swivel link

Cut iron as for a round link, double it (fig. 168), form it over the beck of the anvil (169), weld the ends together and draw them out (170), then form, bend over and scarf (171). Forge the swivel pin (172), set it in the swivel's boss, weld up the eye and finish (173).

Vifaa kwa hatua hii:

Fito ya chuma cha kufuaFito ya chuma cha kufua1 kipande

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
FuaweFuawe
NyundoNyundo
Koleo za mhunziKoleo za mhunzi
8

Troubleshooting

Chain troubleshooting.

Flow

Loading...
9

History and honest limits

From George Edwinson, "Smithing and Forging" VIII, **Amateur Work, Illustrated**, vol. VI (1886-87), p. 83 and figs. 162-175 on p. 80 (checked on the archive.org scan amateurworkillus06lond). He gives no rod size for plough chain; the notebook link sizes, metric figures and tools are ours.

Vifaa

2

Zana Zinazohitajika

5

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...