Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI

Claw Crowbar: a Round Iron Bar with Steeled Chisel Ends, One Split Hot and Bent into a Claw (Edwinson, 1886)
The builder's and fencer's crowbar from George Edwinson's smithing series (Amateur Work, 1886): a round iron bar 2 to 5 ft long with steel-pointed ends, one forged to a chisel, the other split hot into a fork and bent over into a nail-drawing claw, tempered purple.
Kati
Half a day at the forge
Maagizo
1
1
His sizes
His sizes
Inapakia daftari la Jupyter…
2
2
Read Edwinson
Read Edwinson
"It is an ordinary round bar of iron with steel-pointed ends."
3
3
Choose the bar
Choose the bar
Take round bar iron of 1, 1 1/4 or 1 1/2 in (25, 32 or 38 mm), 2 to 5 ft (0.6-1.5 m) long. A bar of best tool steel may be lighter.
Vifaa kwa hatua hii:
Ufito wa chuma kilichofuliwa1 kipandeZana zinazohitajika:
Patasi ya moto4
4
Steel the ends (ours, after his pick method)
Steel the ends (ours, after his pick method)
Split each end hot, weld a steel wedge into the cleft under borax and draw it out, as for a pick point.
Vifaa kwa hatua hii:
Feleji ya kalibu1 kipande
Poda ya boraksi1 kipandeZana zinazohitajika:
Fua ya mhunzi
Patasi ya moto
Fuawe
Nyundo kubwa
Koleo za mhunzi5
5
Forge the chisel end
Forge the chisel end
Forge one end to a chisel shape. Keep the steel no hotter than red and hammer it lightly at that heat.
Zana zinazohitajika:
Fua ya mhunzi
Fuawe
Nyundo
Koleo za mhunzi6
6
Forge the claw
Forge the claw
Forge the other end to a chisel shape too, split it hot into a fork with the hot chisel, and bend the fork over to form the claw. For a quarryman's bar leave out the claw and bend one chisel end over as a short lever.
Zana zinazohitajika:
Fua ya mhunzi
Patasi ya moto
Fuawe
Nyundo
Koleo za mhunzi7
7
Harden and temper
Harden and temper
Harden the steeled ends and temper them to a purple, the best tint for crowbars.
Zana zinazohitajika:
Fua ya mhunzi
Ndoo ya kupoza chuma8
8
Troubleshooting
Troubleshooting
Crowbar troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and fig. 220. The steel wedges follow his pick method; the metric figures and tools are ours.
Vifaa
3- 1 kipandeKishikilia Nafasi
- 1 kipandeKishikilia Nafasi
- 1 kipandeKishikilia Nafasi
Mchoro huu unatengeneza
Blueprint zinazohusiana
Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni
CC0 Umma Wote
Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.
Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.


