Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Steeled Picks: Common Pick, Pickaxe and Miner's Pick, Iron Eye with Steel Points Welded In (Edwinson, 1886)
Forge

Imeundwa na

Forge

14. Novemba 2026NO
6
0
0
0
0

Steeled Picks: Common Pick, Pickaxe and Miner's Pick, Iron Eye with Steel Points Welded In (Edwinson, 1886)

How a village smith made picks in the 1880s, from George Edwinson's smithing series in Amateur Work: an iron head welded round its eye, the ends split hot and steel wedges welded in, then hardened and tempered. Variants: the common pick, the pickaxe with a steel-laid axe blade, and the miner's pick with a steel-faced hammer end.
Juu
A day at the forge

Maagizo

1

Read Edwinson

"The eye or hole for the shaft is formed by first shaping the two sides ... and then welding the two parts together."
2

Form the eye

Forge the two halves of the head with a hollow for the eye in each (his fig. 216), lay them together and weld them into one head round the eye (fig. 217).

Vifaa kwa hatua hii:

Ufito wa chuma kilichofuliwaUfito wa chuma kilichofuliwa1 kipande

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
FuaweFuawe
NyundoNyundo
Koleo za mhunziKoleo za mhunzi
Kipanua tundu cha mhunziKipanua tundu cha mhunzi
3

Draw the ends

Forge the two ends down to the size you need: a pointed bill and a chisel bill for the common pick, an axe and a point for the pickaxe, a point and a hammer for the miner's pick. For the miner's pick leave the eye massive and oval, tapering from both sides as in a hammer.

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
FuaweFuawe
NyundoNyundo
Nyundo kubwaNyundo kubwa
4

Steel the points

Split each bill end with a hot chisel (his hot sett, fig. 218), insert a wedge of steel in the cleft and weld it in under borax, then draw it out to shape. Do not heat cast steel above a cherry red.

Vifaa kwa hatua hii:

Feleji ya kalibuFeleji ya kalibu1 kipande
Poda ya boraksiPoda ya boraksi1 kipande

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
Patasi ya motoPatasi ya moto
Nyundo kubwaNyundo kubwa
FuaweFuawe
Koleo za mhunziKoleo za mhunzi
5

Steel the axe or hammer end

Pickaxe: enclose a slice of shear steel between the folding leaves of iron at the axe end and forge them down together to form the axe. Miner's pick: face the hammer end with steel.

Vifaa kwa hatua hii:

Bamba la feleji ya shearBamba la feleji ya shear1 kipande
Poda ya boraksiPoda ya boraksi1 kipande

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
FuaweFuawe
NyundoNyundo
Koleo za mhunziKoleo za mhunzi
6

Harden and temper

Harden the points and temper them to a brown tint tending to straw at the very point. Temper the pickaxe blade purple where steel meets iron, running to straw at the edge.

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
Ndoo ya kupoza chumaNdoo ya kupoza chuma
7

Handle it (ours)

He does not cover the handle. Ours: shape an ash handle to the eye, drive it in and wedge it.

Vifaa kwa hatua hii:

Kipande cha mti wa ashKipande cha mti wa ash1 kipande
Vibanzi vya mbaoVibanzi vya mbao1 kipande

Zana zinazohitajika:

Kisu cha KuvutaKisu cha Kuvuta
NyundoNyundo
8

Troubleshooting

Pick troubleshooting.

Flow

Loading...
9

History and honest limits

From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond). He gives no dimensions or weights; the sizes, the handle and the tools listed are ours.

Vifaa

6

Zana Zinazohitajika

9

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...