SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Glass Microscope Slides Cut and Edge-Ground
Bubbles

Imeundwa na

Bubbles

14. Oktoba 2026IT
6
0
0
0
0

Glass Microscope Slides Cut and Edge-Ground

A microscope slide is a thin flat strip of glass, about 75 by 25 mm and 1 mm thick, its edges ground smooth. Score thin sheet glass against a straightedge, snap it into strips and pieces, and grind the edges on a wet stone. A frosted end takes pencil for labelling. The picture: a glass slide with a frosted end for writing.
Mwanzo
An hour

Maagizo

1

Score and snap strips

Lay the sheet flat, score a line 25 mm from the edge with the scriber against the straightedge in one firm stroke, and snap it over the straightedge. Repeat across the sheet.

Vifaa kwa hatua hii:

Bamba la kiooBamba la kioo1 kipande

Zana zinazohitajika:

Kichora MistariKichora Mistari
Rula ya kunyooshaRula ya kunyoosha
RulaRula
Glavu za Kazi za NgoziGlavu za Kazi za Ngozi
Miwani ya usalamaMiwani ya usalama
2

Cut to length

Score and snap each strip into 75 mm pieces.

Zana zinazohitajika:

Kichora MistariKichora Mistari
Rula ya kunyooshaRula ya kunyoosha
RulaRula
Glavu za Kazi za NgoziGlavu za Kazi za Ngozi
Miwani ya usalamaMiwani ya usalama
3

Grind the edges

Rub every edge and corner flat on the wet stone until no sharp arris is left.

Vifaa kwa hatua hii:

MajiMaji0.5 lita

Zana zinazohitajika:

Jiwe la kunoaJiwe la kunoa
Glavu za Kazi za NgoziGlavu za Kazi za Ngozi
4

Frost an end

Rub one end of each slide with wet emery cloth until it is evenly frosted, for writing on in pencil. Wash and dry the slides.

Zana zinazohitajika:

Kitambaa cha emeriKitambaa cha emeri
5

Slides per sheet

Inapakia daftari la Jupyter…

Vifaa

2
  • 1 kipande
    Kishikilia Nafasi
  • 0.5 lita
    Kishikilia Nafasi

Zana Zinazohitajika

7

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...