SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Glass Sample Vials: Tubing Closed Flat, with a Lip and a Cork
Bubbles

Imeundwa na

Bubbles

14. Oktoba 2026IT
16
0
0
0
0

Glass Sample Vials: Tubing Closed Flat, with a Lip and a Cork

A vial is a small glass tube closed at one end, usually with a flat bottom where a test tube has a round one. A lip vial is closed with a cork. Work wide glass tubing in the flame as for test tubes, flatten the closed end on the marver, turn out a lip and fit a cork. The picture: a small old glass vial with its cork.
Kati
An afternoon

Maagizo

1

Draw off and close

Heat the tubing in the flame while turning it until it softens through, then pull the ends apart to close it, as for test tubes. Melt the closed end until the glass gathers evenly.

Vifaa kwa hatua hii:

Seti ya Mirija ya KiooSeti ya Mirija ya Kioo1 kipande

Zana zinazohitajika:

Kichomeo cha BunsenKichomeo cha Bunsen
Glavu Zinazostahimili JotoGlavu Zinazostahimili Joto
Miwani ya usalamaMiwani ya usalama
2

Flatten the bottom

While the closed end is soft, press it straight down on the marver so it sets flat and the vial stands (our step).

Zana zinazohitajika:

Kichomeo cha BunsenKichomeo cha Bunsen
Marver (bamba la kusukuma kioo)Marver (bamba la kusukuma kioo)
Glavu Zinazostahimili JotoGlavu Zinazostahimili Joto
3

Cut and turn the lip

Score the tube at the vial's length with a file and snap it. Heat the open end and roll out a small lip so a cork seats firmly.

Zana zinazohitajika:

Tupa ya chumaTupa ya chuma
Kichomeo cha BunsenKichomeo cha Bunsen
Miwani ya usalamaMiwani ya usalama
4

Anneal and cork

Let the vial cool slowly in the edge of the flame, then trim a cork to fit the mouth.

Vifaa kwa hatua hii:

Vizibo vya mziboVizibo vya mzibo1 kipande

Zana zinazohitajika:

Kichomeo cha BunsenKichomeo cha Bunsen
Kisu cha kaziKisu cha kazi
Kitoboa kiziboKitoboa kizibo
5

Tube size for 50 ml

Inapakia daftari la Jupyter…

Vifaa

2

Zana Zinazohitajika

7

Blueprint zinazohusiana

Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...