Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Hafnium: Iodide Vapour Split on a Tungsten Wire Heated beyond 1600 °C (van Arkel and de Boer, US 1,671,213)
Charlie

Imeundwa na

Charlie

1. Novemba 2026DE
5
0
0
0
0

Hafnium: Iodide Vapour Split on a Tungsten Wire Heated beyond 1600 °C (van Arkel and de Boer, US 1,671,213)

Hafnium will not come out of its chloride and hydrogen as clean metal. Van Arkel and de Boer instead let the vapour of hafnium iodide pass a white-hot wire in an evacuated vessel: the iodide splits and pure hafnium grows on the wire. Result: hafnium metal deposited on the wire. Source: A. E. van Arkel and J. H. de Boer, US 1,671,213 (1928). The wire runs white-hot; iodine vapour is released. Picture: the patent drawing.
Juu
1 day

Maagizo

1

Set up the vessel and wire

Hang a wire, for example of tungsten, inside the vessel, fixed with small screws to two leading-in wires sealed through its narrowed top. A side tube goes to a pump. For the high temperatures the iodides need, the patent advises a vessel of suitable metal such as chrome iron rather than glass.

Zana zinazohitajika:

Chombo cha kiooChombo cha kioo
Waya wa tungsteniWaya wa tungsteni
Chanzo cha nishati ya mkondo wa moja kwa mojaChanzo cha nishati ya mkondo wa moja kwa moja
2

Pump out the air

Put the hafnium iodide in the vessel and pump out the air and any other gas that would spoil the reaction.

Vifaa kwa hatua hii:

Iodidi ya hafniIodidi ya hafni1 as required

Zana zinazohitajika:

Pampu ya utupuPampu ya utupu
3

Evaporate the iodide

Heat the vessel until the iodide gives enough vapour. The patent gives 400-600 °C only for zirconium iodide; for hafnium iodide the temperature is not given. Ours: a furnace round the vessel.

Zana zinazohitajika:

Tanuru ya MrijaTanuru ya Mrija
4

Deposit hafnium on the white-hot wire

Pass a current through the wire to heat it beyond 1600 °C while the iodide vapour flows along it. The iodide splits and hafnium deposits on the wire. Do not overheat: the deposit can alloy with the wire.

Zana zinazohitajika:

Chanzo cha nishati ya mkondo wa moja kwa mojaChanzo cha nishati ya mkondo wa moja kwa moja
Kipima joto kaliKipima joto kali
Waya wa tungsteniWaya wa tungsteni

Vifaa

1

Zana Zinazohitajika

6

Mchoro huu unatengeneza

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...