Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Hand-Crank Drill Press in a Wooden Frame, with a Screw-Fed Table (Boy Mechanic, 1915)
Forge

Imeundwa na

Forge

14. Novemba 2026NO
8
0
0
0
0

Hand-Crank Drill Press in a Wooden Frame, with a Screw-Fed Table (Boy Mechanic, 1915)

A cheap drill press for iron and brass: the chuck of an old carpenter's brace on a cranked shaft running in a brass bearing through one post of a wooden frame, and a sliding table pushed up against the drill by a 1/2 in bolt through the opposite post.
Kati
A day

Maagizo

1

Read the Boy Mechanic

"A broken carpenter's brace furnished the chuck, which was fastened to a 1/2-in. shaft having a detachable crank."
2

Build the frame

Make a frame of two end posts about 3 in wide joined by side rails about 1 in by 2 in, as in the drawing. Bore a hole for the chuck shaft through one post and for the feed bolt through the other, on one line and exactly central.

Vifaa kwa hatua hii:

Ubao wa Mti MgumuUbao wa Mti Mgumu1 kipande
Parafujo za mbaoParafujo za mbao1 kipande

Zana zinazohitajika:

Msumeno wa mkonoMsumeno wa mkono
Kekee cha mkono chenye nchaKekee cha mkono chenye ncha
NyundoNyundo
3

Fit the chuck shaft

Press a brass tube tightly into the hole in the first post as a bearing. Fasten the chuck from a broken brace to a 1/2 in shaft running in the tube, with a detachable crank on the outer end.

Vifaa kwa hatua hii:

Kekee cha mkono chenye nchaKekee cha mkono chenye ncha1 kipande
Ufito mviringo wa chuma lainiUfito mviringo wa chuma laini1 kipande
Neli ya shaba nyeupeNeli ya shaba nyeupe1 kipande

Zana zinazohitajika:

Msumeno wa chumaMsumeno wa chuma
Tupa (Tupa ya Mkono)Tupa (Tupa ya Mkono)
4

Make the sliding table

Make the table from a post like the end posts with guides that keep it in line between the rails. Fix a plate on its underside where the bolt bears.

Vifaa kwa hatua hii:

Ubao wa Mti MgumuUbao wa Mti Mgumu1 kipande
Pau Bapa la Chuma LainiPau Bapa la Chuma Laini1 kipande

Zana zinazohitajika:

Msumeno wa mkonoMsumeno wa mkono
5

Fit the feed screw

Fasten a square nut in the opposite post and run a 1/2 in machine bolt through it to push the table up against the drill. A crank can be fitted to the bolt.

Vifaa kwa hatua hii:

Mkusanyiko wa bolti za pembe sitaMkusanyiko wa bolti za pembe sita1 kipande
Nati ya pembe sitaNati ya pembe sita1 kipande

Zana zinazohitajika:

PatasiPatasi
6

Troubleshooting

Hand drill press troubleshooting.

Flow

Loading...
7

History and honest limits

From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 242, by L. R. Kelley (checked on the archive.org scan boymechanicbook200chic2). Only the shaft, bolt and drawing sizes are his; the wood and fixings are ours.

Vifaa

8

Zana Zinazohitajika

6

Blueprint zinazohusiana

Blueprint hizi zinashiriki maarifa โ€” mbinu, vifaa au kanuni

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...