Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Pipe Rack: Leather-Edged Bowl Recesses and a Notched Stem Rail That Lets the Pipes Drain (King, 1904)
Woody

Imeundwa na

Woody

13. Novemba 2026NO
4
0
0
0
0

Pipe Rack: Leather-Edged Bowl Recesses and a Notched Stem Rail That Lets the Pipes Drain (King, 1904)

Roland King of Newport, Rhode Island, received US 769,350, dated 6 September 1904, for a pipe rack that holds each tobacco pipe bowl-down in an egg-shaped recess edged with soft leather, its stem resting in a notch of a raised rail behind, so moisture drains from the stem into the bowl. A classic gift for Father's Day. We make it from hardwood with calf leather edging. All sizes are ours.
Mwanzo
About 3 hours

Maagizo

1

Spacing

Inapakia daftari la Jupyter…
2

Read US 769,350

"It will be seen that my pipe-rack is of exceedingly simple construction and one which insures the pipes being supported thereon in the correct position to drain moisture from the stem into the bowl."
3

Cut and hollow the base

Cut the base A from a hardwood board to the notebook's length. Mark the egg-shaped recesses B along the front, bore each out with the brace and bit and shape it to an egg with a gouge, so a pipe bowl sits in it.

Vifaa kwa hatua hii:

Ubao wa Mti MgumuUbao wa Mti Mgumu1 kipande

Zana zinazohitajika:

Tepi ya kupimiaTepi ya kupimia
PenseliPenseli
Msumeno wa mkonoMsumeno wa mkono
Kekee cha mkono chenye nchaKekee cha mkono chenye ncha
Patasi ya Bapa-PindaPatasi ya Bapa-Pinda
Sandarusi (karatasi ya kusugua)Sandarusi (karatasi ya kusugua)
4

Edge the recesses with leather

Cut thin strips of soft calf leather and glue them round the edge of each recess with contact cement, his cushion edging C, so the bowls are not nicked or scratched.

Vifaa kwa hatua hii:

Ngozi ya ndamaNgozi ya ndama1 kipande
Gundi ya mgusanoGundi ya mgusano1 kipande

Zana zinazohitajika:

Kisu cha kazi za mikonoKisu cha kazi za mikono
5

Make the stem rail

Cut the rack E from the same board and cut a notch e in its front edge opposite each recess, wide enough for a pipe stem, rounded and sanded smooth.

Vifaa kwa hatua hii:

Ubao wa Mti MgumuUbao wa Mti Mgumu1 kipande

Zana zinazohitajika:

Msumeno wa mkonoMsumeno wa mkono
Msumeno wa kukata mikunjoMsumeno wa kukata mikunjo
Tupa mbovu ya mbaoTupa mbovu ya mbao
Sandarusi (karatasi ya kusugua)Sandarusi (karatasi ya kusugua)
6

Raise the rail

Drill the back edge of the base and the underside of the rail and glue in a row of dowel pins D, holding the rail above the rear edge of the base at the notebook's height.

Vifaa kwa hatua hii:

Vijiti vya mbao ngumuVijiti vya mbao ngumu1 kipande
Gundi ya MbaoGundi ya Mbao1 kipande

Zana zinazohitajika:

Kekee cha mkonoKekee cha mkono
Msumeno wa mkonoMsumeno wa mkono
7

Use it

Set each pipe with its bowl in a recess and its stem in the notch above: the stem slopes down toward the bowl.
8

Troubleshooting

Pipe rack troubleshooting.

Flow

Loading...
9

History and honest limits

**Roland King** of Newport, Rhode Island, US 769,350, dated 6 September 1904, filed 12 May 1903. He claimed "a pipe-rack having a base A, in which are provided one or more egg-shaped recesses ... to receive the bowls of pipes, in combination with a stem-supporting rack E, supported above one edge of the base and provided with notches to hold the pipe-stems". He gives no sizes: the hardwood, calf, all sizes and the number of pipes are ours.

Vifaa

5

Zana Zinazohitajika

10

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...