SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
BAADAYE YA KIJANI
REVERSE ENGINEERING
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Making Lampblack Pigment — Collecting Carbon Soot from a Burning Flame
Charlie

Imeundwa na

Charlie

22. Mei 2026DE
0
0
0
6
0

Making Lampblack Pigment — Collecting Carbon Soot from a Burning Flame

Lampblack is one of the oldest pigments in human history — pure carbon particles collected from the soot of a burning flame. Evidence of lampblack use extends back to the earliest cave paintings (over 30,000 years ago), and it remained the primary black pigment in most painting traditions worldwide until the industrial era. Chinese ink sticks (mòtiáo) were made from lampblack mixed with animal glue for at least 4,000 years, and the same principle underlies Indian ink, Japanese sumi ink, and carbon black ink used throughout the ancient Mediterranean.

Lampblack is produced by incomplete combustion — burning an oil, fat, or resin in a restricted oxygen environment so that carbon particles form in the flame rather than being fully oxidised to carbon dioxide. These particles are extremely fine (20-100 nanometres), giving lampblack an intense, deep black and excellent covering power. The soot is collected on a cool surface held above the flame: a ceramic plate, a metal sheet, or traditionally an inverted clay pot.

Different fuels produce slightly different blacks. Burning sesame oil, linseed oil, or rapeseed oil gives a warm, blue-black soot. Burning pine resin or pitch gives a cooler, brownish-black. Animal fat (tallow) gives a greyish-black. The finest lampblack comes from slow-burning, clean-burning vegetable oils. Lampblack is chemically inert, lightfast, non-toxic, and compatible with every binder — oil, egg tempera, watercolour, fresco, ink. It is the most versatile black pigment ever discovered.

Mwanzo
60-90 minutes active

Maagizo

1

Set up the oil lamp and collection surface

Pour 100-200 ml of vegetable oil (linseed, sesame, or rapeseed) into a shallow clay dish or metal bowl. Make a wick from twisted cotton cord or cotton fabric strip. Place the wick in the oil with one end extending over the rim. Light the wick and adjust it to produce a small, steady, smoky flame — a short wick gives more smoke (incomplete combustion). Position a ceramic plate or metal sheet 3-5 cm above the flame tip where the soot is densest.

Vifaa kwa hatua hii:

Linseed OilLinseed Oil200 ml

Zana zinazohitajika:

Ceramic Plate (for soot collection)Ceramic Plate (for soot collection)
2

Collect the soot

Let the lamp burn steadily for 30-60 minutes. The soot deposits as a velvety black layer on the underside of the collection surface. When a thick layer has accumulated (1-2 mm), carefully remove the plate and scrape the soot into a clean container using a palette knife or the edge of a stiff card. Replace the plate and continue collecting. Work in a well-ventilated area — the smoky flame produces carbon monoxide. For a full session, expect to collect 5-15 g of lampblack from 200 ml of oil.

Zana zinazohitajika:

Palette KnifePalette Knife
3

Purify the soot by washing

Raw lampblack contains trace oils and tar from incomplete combustion. To purify, place the collected soot in a small container and add a little warm water. Stir to form a slurry. Let the heavy impurities settle for a few minutes, then carefully pour off the black suspension into a second container — this contains the fine pigment particles. Let the suspension settle overnight. Pour off the clear water and allow the pigment to dry completely. This levigation step removes gritty particles and oily residues.

Zana zinazohitajika:

Glass Jar (500ml)Glass Jar (500ml)
4

Grind to a fine powder

Once dry, the lampblack will be a soft, fluffy mass. Grind it with a mortar and pestle or on a glass slab with a glass muller to break up any lumps. Lampblack is already extremely fine, so this step is mostly about achieving uniformity. The finished pigment should feel silky and leave an intense black mark when rubbed between your fingers. Store in a sealed jar away from moisture. This pigment is ready to mix with any binder — oil, egg yolk, gum arabic, hide glue, or lime water.

Zana zinazohitajika:

Mortar and PestleMortar and Pestle
Glass MullerGlass Muller

Vifaa

1

Zana Zinazohitajika

5

Vifaa vya Michoro Iliyounganishwa

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...