SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Nylon Webbing: 1-inch Herringbone Twill to MIL-W-4088
Charlie

Imeundwa na

Charlie

20. Oktoba 2026DE
3
0
0
0
0

Nylon Webbing: 1-inch Herringbone Twill to MIL-W-4088

Nylon webbing is a narrow, dense strap woven from nylon 6,6 yarn. The US military specification MIL-W-4088 sets each type exactly. Its Type II is 1 inch wide, woven on a shuttle loom in a 2 up, 2 down herringbone twill that reverses once at the centre, with at least 134 warp ends and 34 picks per inch. It must weigh no more than 0.42 oz per yard and hold at least 600 lb. The webbing is left untreated and unbleached. The picture: webbing rolls (Wikimedia Commons, public domain).
Kati
2 days

Maagizo

1

Twist the yarns

Use bright, unbleached nylon 6,6 multifilament: 420 denier of 68 filaments for the warp, 840 denier of 140 filaments for the filling. Give each yarn at least 2½ turns per inch.

Vifaa kwa hatua hii:

Nyuzinyuzi za nailoniNyuzinyuzi za nailoni13 g/m

Zana zinazohitajika:

Gurudumu la kusokota uziGurudumu la kusokota uzi
Mizani ya mizani-mbiliMizani ya mizani-mbili
2

Warp 134 ends

Wind at least 134 warp ends (single yarns) and thread them for a 2 up, 2 down herringbone twill with one reversal at the centre of the strap, 1 inch wide.

Zana zinazohitajika:

Kiunzi cha kutandika nyuziKiunzi cha kutandika nyuzi
Mtambo wa kufuma wa pedaliMtambo wa kufuma wa pedali
RulaRula
3

Weave 34 picks per inch

Weave with a shuttle, at least 34 picks of filling per inch. Keep the width at 1 inch ± 1/32 and the thickness at .025-.040 inch.

Zana zinazohitajika:

Mtambo wa kufuma wa pedaliMtambo wa kufuma wa pedali
Kitufe cha kufumia chenye umbo la mashuaKitufe cha kufumia chenye umbo la mashua
RulaRula
4

Check and roll

A yard must weigh no more than 0.42 oz (13 g per metre). The specification puts the webbing up in rolls of 90 to 110 yards and asks a breaking strength of at least 600 lb.

Zana zinazohitajika:

Mizani ya mizani-mbiliMizani ya mizani-mbili
MkasiMkasi

Vifaa

1

Zana Zinazohitajika

7

Blueprint zinazohusiana

Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...