SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI

PTFE Resin Powder: Tetrafluoroethylene Polymerised under Pressure, Plunkett 1941
PTFE (polytetrafluoroethylene) is the chemically inert plastic. Roy Plunkett found that tetrafluoroethylene, kept under pressure at room temperature, slowly turns into a white solid (US 2,230,654, 1941). A little silver nitrate speeds it up: 7 parts of the gas with 0.1 part silver nitrate at 25 °C for 21 days gave 2.3 parts of polymer. The powder dissolves in nothing usual, does not burn on its own, and melts only at red heat.
The picture: our diagram.
Juu
3 weeks
Maagizo
1
1
Charge the cylinder
Charge the cylinder
Put 0.1 part of silver nitrate in a steel pressure cylinder, close it and condense in 7 parts of tetrafluoroethylene, so it stands under its own pressure.
Vifaa kwa hatua hii:
Tetrafluoroethilini7 partsZana zinazohitajika:
Nitrati ya Fedha
Mtungi wa gesi yenye shinikizo
Mtego baridi
Mizani ya mizani-mbili
Miwani ya kinga dhidi ya kemikali
Glavu za mpira2
2
Leave at 25 °C for 21 days
Leave at 25 °C for 21 days
Keep the cylinder at 25 °C for 21 days. Warmer is faster. Without the silver nitrate, 10 days gave only about 7 %.
Zana zinazohitajika:
Mtungi wa gesi yenye shinikizo3
3
Remove the gas, take out the powder
Remove the gas, take out the powder
Let out the unpolymerised tetrafluoroethylene (ours: into a cold trap to use again) and take out the solid polymer: about 2.3 parts, a third of the gas.
Zana zinazohitajika:
Mtego baridi
Kabati la kutoa mvuke (lenye bomba)
Glavu za mpiraVifaa
1- 7 partsKishikilia Nafasi
Zana Zinazohitajika
7- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
Mchoro huu unatengeneza
Blueprint zinazohusiana
Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni
CC0 Umma Wote
Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.
Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

