Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Expanding Book Support: Lazy-Tongs Between Two End Pieces, Locked by a Thumb-Nut (Roseboom, 1901)
Forge

Imeundwa na

Forge

13. Novemba 2026NO
6
0
0
0
0

Expanding Book Support: Lazy-Tongs Between Two End Pieces, Locked by a Thumb-Nut (Roseboom, 1901)

Jesse Roseboom of Cincinnati received US 668,961, dated 26 February 1901, for a book support that fills any gap on a shelf. Two end pieces are joined by a lazy-tongs; set it between the books and the shelf's side, open it until the books stand up firmly, and tighten a thumb-nut on the centre bolt, where two roughened disks lock the levers. We make it from hardwood and flat bar. All sizes are ours.
Mwanzo
About 3 hours

Maagizo

1

How far it opens

Inapakia daftari la Jupyter…
2

Read US 668,961

"It is placed between two sets of books on a shelf or the like or between a row of books and an upright of the shelf, and the connection B is then expanded, so as to press the end pieces against the upright and the adjacent book, after which the connection is adjustably fixed."
3

Make the end pieces

Cut two hardwood end pieces about as tall as your books' lower half (ours), his end pieces A, and sand them. Screw a small butt hinge to the middle of each inner face, his hinge-plates E, with the knuckle upright.

Vifaa kwa hatua hii:

Ubao wa Mti MgumuUbao wa Mti Mgumu1 kipande
Bawaba ya mlangoBawaba ya mlango2 vipande
Parafujo za mbaoParafujo za mbao1 kipande

Zana zinazohitajika:

Msumeno wa mkonoMsumeno wa mkono
Sandarusi (karatasi ya kusugua)Sandarusi (karatasi ya kusugua)
Seti ya bisibisiSeti ya bisibisi
4

Make the levers

Cut two long levers C and four short levers D of flat bar, round the ends and drill them at the notebook's centres. Drill the long levers at their middles for the bolt. File two washers rough on one face and fix one to each long lever round its centre hole, his corrugated disks H.

Vifaa kwa hatua hii:

Pau Bapa la Chuma LainiPau Bapa la Chuma Laini1 kipande
Washa bapaWasha bapa1 kipande

Zana zinazohitajika:

Msumeno wa chumaMsumeno wa chuma
Seti ya tupaSeti ya tupa
Kekee cha NguzoKekee cha Nguzo
Seti ya vichimbuziSeti ya vichimbuzi
Kibano cha meza ya kaziKibano cha meza ya kazi
5

Assemble the lazy-tongs

Bolt the long levers together at their centres with the rough faces meeting and a wing nut on the bolt, his bolt F and thumb-nut G. Rivet a short lever to each arm end of the long levers, loosely so they turn, and rivet the other ends of each pair to the free leaf of an end piece's hinge. The long levers' ends should bear on the end pieces and keep them upright.

Vifaa kwa hatua hii:

Skrubu Yenye Kichwa cha SoketiSkrubu Yenye Kichwa cha Soketi1 kipande
Nati ya mabawaNati ya mabawa1 kipande
Rivet za chuma cha puaRivet za chuma cha pua1 kipande

Zana zinazohitajika:

Nyundo yenye kichwa cha duaraNyundo yenye kichwa cha duara
Kigwe cha KatikatiKigwe cha Katikati
Spana inayoweza kurekebishwaSpana inayoweza kurekebishwa
6

Use it

Set it in the gap on the shelf, open it until both end pieces press the books and the shelf's side, and tighten the wing nut. Loosen the nut to close it up and move it.
7

Troubleshooting

Book support troubleshooting.

Flow

Loading...
8

History and honest limits

**Jesse Roseboom** of Cincinnati, US 668,961, dated 26 February 1901, filed 7 August 1900. He claimed "a book-support for use on shelves and the like, comprising end pieces, and the long and short levers interposed between the end pieces; the long levers being pivotally connected together, and the short levers being pivotally connected to the arms of the long levers, and to the end pieces", and the roughened meeting faces with bolt and nut. He gives no sizes; the hardwood, flat bar, hinges as his hinge-plates, rivets and all sizes are ours.

Vifaa

8

Zana Zinazohitajika

11

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...