SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Rubber Hose: Braided, Spirally Wrapped and Vulcanized in Long Lengths
Henry Cobb's wrapped hose (Revere Rubber, US 1,230,867, 1917). A rubber tube is forced through a ring die, braided over while held open by pressure, wrapped by machine with a helical strip of frictioned fabric overlapping half its width, covered in rubber and vulcanized. Wrapping by machine instead of rolling bias-cut fabric by hand lets the hose run 500 ft or more, and Cobb says it stands nearly twice the bursting pressure.
The patent gives no sizes, recipes or cure times. Couplings are not part of it: an air hose is this hose with couplings fitted. The picture: the patent's sheet 1.
Juu
1 day
Maagizo
1
1
Force the inner tube
Force the inner tube
Force vulcanizable rubber compound through the ring-shaped gap between the two parts of a tube die to make the inner tube (1).
Vifaa kwa hatua hii:
Mchanganyiko wa mpira1 batchZana zinazohitajika:
Kalibu ya kusukuma mrija2
2
Braid over the tube
Braid over the tube
Run the tube through a braiding machine that lays crossing helical strands over it (2), coating the strands with rubber compound as they braid. Keep the tube under air pressure so it does not collapse. Ours: the air from a compressor. The braid may be left out, but it holds the hose to size.
Vifaa kwa hatua hii:
Uzi1 batchMchanganyiko wa mpira1 batchZana zinazohitajika:
Mashine ya kusuka
Kibana hewa3
3
Cut the fabric along the warp
Cut the fabric along the warp
Cut frictioned fabric into a long strip lengthwise, along the warp threads; wound helically, both warp and weft then run round the hose as if cut on the bias.
Vifaa kwa hatua hii:
Kitambaa kilichoshindiliwa mpira1 roliiZana zinazohitajika:
Kisu cha kazi4
4
Wrap the strip half over
Wrap the strip half over
Feed the braided tube through the wrapping machine, which winds the strip (3) round it under tension, each turn over half the last: two plies, the whole length without stopping. For four plies wind a second strip (5) over the first, in the same pass or a second.
Zana zinazohitajika:
Mashine ya kufunga bomba5
5
Plies from the overlap
Plies from the overlap
Inapakia daftari la Jupyter…
6
6
Cover and vulcanize
Cover and vulcanize
Apply a layer of rubber compound (4) over the last winding for a smooth, protected outside. Vulcanize the hose for its whole length in a mould or otherwise.
Vifaa kwa hatua hii:
Mchanganyiko wa mpira1 batchZana zinazohitajika:
Kalibu ya kuvulkanishaVifaa
3- 1 batchKishikilia Nafasi
- 1 batchKishikilia Nafasi
- Kishikilia Nafasi
Zana Zinazohitajika
6- Kishikilia Nafasi
- Kishikilia Nafasi
- 1 vendor sell this, none ship to you yetKishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
Mchoro huu unatengeneza
Blueprint zinazohusiana
Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni
CC0 Umma Wote
Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.
Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.