SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Heil and Esch · Public domain (1909)
Rubber Stoppers: Pará Rubber with Ceresine, Moulded and Cured (Heil & Esch 1909)
Laboratory rubber stoppers from a 1909 rubber factory's book of mixings: Pará rubber with ceresine wax, sulphur and magnesia, run out as a cord, cut to weight, pressed into moulds and cured.
Source: Heil & Esch, The Manufacture of Rubber Goods (1909), mixing No. 34 (p. 108) and the stopper method (p. 135). They give no cure time or temperature. Using smoked ball rubber as their Pará, and the mill, clamps and steam vessel, are ours. Picture: their page of mixings.
Kati
1 day
Maagizo
1
1
Weigh mixing No. 34
Weigh mixing No. 34
Weigh out 10,000 g Pará rubber, 2,000 g ceresine, 1,000 g sulphur and 100 g calcined magnesia (magnesia usta).
Vifaa kwa hatua hii:
Tufe la mpira lililokaushwa kwa moshi10000 g
Nta ya seresini2000 g
Unga wa sulfuri1000 g
Oksidi ya magnesiamu100 gZana zinazohitajika:
Mizani ya mizani-mbili2
2
Mix on the rolls
Mix on the rolls
Work the rubber on the mixing rolls and work the ceresine, sulphur and magnesia into it until the mixing is even.
Zana zinazohitajika:
Kinu cha mpira cha roli mbili3
3
Run a cord on the tube machine
Run a cord on the tube machine
Run the mixing through the tube machine as a cord of a size to suit the stoppers. It must be free from air bubbles, or the stoppers will be faulty after curing.
Zana zinazohitajika:
Mashine ya mirija ya mpira4
4
Cut pieces to weight
Cut pieces to weight
Cut the cord into pieces of the exact weight of one stopper plus 2 or 3 per cent, for what squeezes out of the mould.
Zana zinazohitajika:
Kisu cha kazi za mikonoMizani ya mizani-mbili5
5
Press into moulds and clamp
Press into moulds and clamp
Press each piece into a mould and clamp the small moulds very tightly in iron clips.
Zana zinazohitajika:
Kalibu ya kuvulkanisha
Klampu ya umbo la C6
6
Cure in steam
Cure in steam
Cure the clamped moulds in a steam heater (Heil & Esch also name the sulphur bath). They give no time or temperature for stoppers; then open the moulds and take out the stoppers.
Zana zinazohitajika:
Otoklavu ya mezaKalibu ya kuvulkanishaVifaa
4- Kishikilia Nafasi
- 2000 gKishikilia Nafasi
- 1000 gKishikilia Nafasi
- 100 gKishikilia Nafasi
Zana Zinazohitajika
7- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
Mchoro huu unatengeneza
Blueprint zinazohusiana
Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni
CC0 Umma Wote
Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.
Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.