SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Neodymium Magnets: Nd-Fe-B Alloy Milled, Pressed in a Field and Sintered (Sagawa 1988)
Forge

Imeundwa na

Forge

28. Oktoba 2026NO
9
0
0
0
0

Neodymium Magnets: Nd-Fe-B Alloy Milled, Pressed in a Field and Sintered (Sagawa 1988)

Neodymium magnets are iron, boron and neodymium. Sagawa's team at Sumitomo melted the three together, ground the casting to a powder finer than 10 µm, lined the grains up in a magnetic field while pressing them, and sintered the compact in argon. Their sample 5, 79 % iron, 6 % boron and 15 % neodymium by atoms, reached 36.5 MGOe, higher than the best samarium-cobalt magnets of the day. Source: M. Sagawa et al. (Sumitomo Special Metals), US 4,770,723 (1988). Unknown: how the pure iron, the ferroboron and the neodymium metal are made; the patent does not say. The magnetising is ours, after Przybylski et al., Sensors 16:569 (2016). The 1 kg weights are our arithmetic from the patent's atomic percentages. Picture: the patent's Fig. 8.
Mtaalamu
2 days

Maagizo

1

Weigh sample 5: 79 Fe, 6 B, 15 Nd

Sample 5 is 79 % iron, 6 % boron and 15 % neodymium by atoms. Use 99.9 % electrolytic iron, ferroboron (19.38 % B, 5.32 % Al, 0.74 % Si, 0.03 % C, the rest iron) and neodymium of 99.7 % or better. Ours: a 1 kg melt, by arithmetic: 626.8 g iron, 50.4 g ferroboron, 325.8 g neodymium. Unknown: how these three are made.

Vifaa kwa hatua hii:

Chuma cha elektrolisisiChuma cha elektrolisisi626.8 g
FeroboroniFeroboroni50.4 g
Metali ya neodimiamuMetali ya neodimiamu325.8 g

Zana zinazohitajika:

Mizani ya mizani-mbiliMizani ya mizani-mbili
2

Melt by high frequency in argon and cast

Melt the charge in a high-frequency (induction) furnace under argon and pour it into a water-cooled copper mould.

Zana zinazohitajika:

Tanuru la uingizajiTanuru la uingizaji
Kaure ya Udongo Mgumu wa MotoKaure ya Udongo Mgumu wa Moto
ArgoniArgoni
Mtungi wa gesi yenye shinikizoMtungi wa gesi yenye shinikizo
Kalibu ya shaba inayopozwa kwa majiKalibu ya shaba inayopozwa kwa maji
Glavu Zinazostahimili JotoGlavu Zinazostahimili Joto
3

Stamp to 35 mesh, ball-mill to 3-10 µm

Crush the casting in a stamp mill until it passes a 35-mesh sieve. Then grind it in a ball mill for 3 hours, to 3-10 µm.

Zana zinazohitajika:

Kinu cha MtwangoKinu cha Mtwango
Seti ya chekecheke (matundu ya viwango)Seti ya chekecheke (matundu ya viwango)
Kinu cha mipira ya chumaKinu cha mipira ya chuma
Miwani ya usalamaMiwani ya usalama
4

Press in a 10 kOe field at 1.5 t/cm²

Line the powder up in a magnetic field of 10 kOe and press it at 1.5 tonnes per cm². Unknown: the size and shape of the magnets.

Zana zinazohitajika:

Mashine ya kubana kwa uga wa sumakuMashine ya kubana kwa uga wa sumaku
5

Sinter in argon at 1000-1200 °C

Sinter the compacts at 1000-1200 °C for about one hour in argon, then let them cool. Sample 5 measured 13.0 kG remanence, 8.0 kOe coercivity and 36.5 MGOe.

Zana zinazohitajika:

Tanuru ya MrijaTanuru ya Mrija
ArgoniArgoni
Mtungi wa gesi yenye shinikizoMtungi wa gesi yenye shinikizo
Glavu Zinazostahimili JotoGlavu Zinazostahimili Joto
6

Magnetise the magnets

Ours, after Przybylski et al., Sensors 16:569 (2016): put each magnet in the coil of an impulse magnetiser and discharge a capacitor bank through it. They found a field of 1200 kA/m enough to saturate N38 sintered Nd-Fe-B; their magnetiser used a 1 mF bank charged up to 5000 V, a thyristor switch and a 440-turn coil of 3 mm copper wire with an 80 mm bore.

Zana zinazohitajika:

KisumakishajiKisumakishaji

Vifaa

3

Zana Zinazohitajika

14

Blueprint zinazohusiana

Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...