SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Sledgehammer Forged with Hardened Faces and a Long Handle
Jarek Tuszyński (Wikimedia Commons) · CC BY-SA 3.0
Forge

Imeundwa na

Forge

14. Oktoba 2026NO
25
0
0
0
0

Sledgehammer Forged with Hardened Faces and a Long Handle

A sledgehammer is a heavy flat-faced head on a long handle, swung with both hands: the striker's hammer that moves heavy iron at the anvil, and the maul for stakes and stone. Its head is usually 1 to 9 kg. Forge a block of tool steel, punch and drift the eye, harden both faces, and hang it on a long ash handle. The picture: a long-handled spike maul once used to drive railroad spikes, C&O Railway Heritage Center.
Juu
A day

Maagizo

1

Cut the block

Cut a length of thick tool-steel bar on the hardy for the head weight you want (see the notebook).

Vifaa kwa hatua hii:

Kipande cha pembe nane cha feleji ya zanaKipande cha pembe nane cha feleji ya zana1 kipande
MkaaMkaa1 as required

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
Patasi ya kukata kwenye fuawePatasi ya kukata kwenye fuawe
FuaweFuawe
Mizani ya mizani-mbiliMizani ya mizani-mbili
Glavu za kulehemuGlavu za kulehemu
Miwani ya usalamaMiwani ya usalama
2

Punch and drift the eye

At a bright yellow heat punch an eye through the middle, from both sides, and drive the drift through to open it to an oval a little narrower in the middle.

Zana zinazohitajika:

Kitoboa cha motoKitoboa cha moto
Kipanua tundu cha mhunziKipanua tundu cha mhunzi
Nyundo yenye kichwa cha msalabaNyundo yenye kichwa cha msalaba
FuaweFuawe
Koleo za mhunziKoleo za mhunzi
Glavu za kulehemuGlavu za kulehemu
Miwani ya usalamaMiwani ya usalama
3

Dress the faces

Forge the head square, chamfer the edges of both faces so they will not chip, and file the faces flat and slightly crowned.

Zana zinazohitajika:

Nyundo yenye kichwa cha msalabaNyundo yenye kichwa cha msalaba
FuaweFuawe
Tupa ya chumaTupa ya chuma
Glavu za kulehemuGlavu za kulehemu
Miwani ya usalamaMiwani ya usalama
4

Harden the faces

Heat each face to cherry red and quench it alone in water, keeping the eye soft; polish and temper the faces to brown.

Vifaa kwa hatua hii:

MajiMaji10 lita

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
Ndoo ya kupoza chumaNdoo ya kupoza chuma
Koleo za mhunziKoleo za mhunzi
Glavu za kulehemuGlavu za kulehemu
Miwani ya usalamaMiwani ya usalama
5

Hang it

Saw and shave a straight-grained ash handle about 80–90 cm long (our length) to fit the eye tightly from below, drive the head on, split and wedge the top, and oil the handle.

Vifaa kwa hatua hii:

Utepe wa mbao gumuUtepe wa mbao gumu2 vipande
Mafuta ya KitaniMafuta ya Kitani0.05 lita

Zana zinazohitajika:

Msumeno wa mkonoMsumeno wa mkono
Kisu cha KuvutaKisu cha Kuvuta
6

Bar for the head

Inapakia daftari la Jupyter…

Vifaa

5

Zana Zinazohitajika

14

Mchoro huu unatengeneza

Thumbnail
Kishikilia nafasi

Nyundo kubwa

Free

763
0

Blueprint zinazohusiana

Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni

Iron Adze Forged with an Eye and a Steeled Edge

Iron Adze Forged with an Eye and a Steeled Edge

na ForgeNO

Mhunzi

21
0
0
0
0
0
Forging an Iron Axe Head — The Tool That Cleared the Forests

Forging an Iron Axe Head — The Tool That Cleared the Forests

na ForgeNO

Zana za Uchimbaji

41
0
0
0
1
0

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...