SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Slotted Machine Screws Turned from Round Bar
Forge

Imeundwa na

Forge

11. Oktoba 2026NO
41
0
0
0
0

Slotted Machine Screws Turned from Round Bar

Small machine screws with a slotted cheese head are turned from round bar: the head is the bar's own diameter, the shank is turned down and threaded, and a slot is sawn across the head. The example is M4 to ISO 1207: head 7 mm across and 2.6 mm high, slot 1.2 mm wide and at least 1.1 mm deep.
Kati
15 minutes per screw

Maagizo

1

Turn the head diameter

Chuck mild steel round bar and turn the end to 7 mm for a length of 20 mm more than the screw.

Vifaa kwa hatua hii:

Ufito mviringo wa chuma lainiUfito mviringo wa chuma laini0.2 mita

Zana zinazohitajika:

Kereza ya ChumaKereza ya Chuma
Chaki ya kereza yenye makucha 3Chaki ya kereza yenye makucha 3
Seti ya zana za lathe (HSS)Seti ya zana za lathe (HSS)
Kipima-unene cha dijitali cha inchi 6Kipima-unene cha dijitali cha inchi 6
Miwani ya usalamaMiwani ya usalama
Mafuta ya kukatiaMafuta ya kukatia
2

Turn the shank

Turn the shank a little under 4 mm, leaving 2.6 mm of head plus the parting width. Chamfer the end.

Zana zinazohitajika:

Seti ya zana za lathe (HSS)Seti ya zana za lathe (HSS)
Kipima-unene cha dijitali cha inchi 6Kipima-unene cha dijitali cha inchi 6
3

Thread M4

With the lathe off, cut the M4 x 0.7 thread with the die and oil.

Zana zinazohitajika:

Seti ya kukata nyuzi za skrubuSeti ya kukata nyuzi za skrubu
Mpini wa kukata nyuzi za njeMpini wa kukata nyuzi za nje
Mafuta ya kukatiaMafuta ya kukatia
4

Part off

Part the screw off 2.6 mm behind the shank shoulder and round the head's edge with a file.

Zana zinazohitajika:

Patasi ya kukata kaziPatasi ya kukata kazi
Seti ya tupaSeti ya tupa
5

Saw the slot

Hold the screw in soft vise jaws and saw a slot straight across the head, 1.2 mm wide and at least 1.1 mm deep. Deburr it.

Zana zinazohitajika:

Msumeno wa chumaMsumeno wa chuma
Kibano cha meza ya kaziKibano cha meza ya kazi
Seti ya tupaSeti ya tupa
Kipima-unene cha dijitali cha inchi 6Kipima-unene cha dijitali cha inchi 6
6

Troubleshooting

Machine screw troubleshooting.

Flow

Loading...

Vifaa

1

Zana Zinazohitajika

12

Mchoro huu unatengeneza

Thumbnail
Kishikilia nafasi

Skrubu za mashine

Free

2,656
0

Blueprint zinazohusiana

Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni

Cutting a Thread with a Die: Making Your Own Bolt

Cutting a Thread with a Die: Making Your Own Bolt

na ForgeNO

Uchimbaji chuma

55
0
0
0
0
0
Choosing the Fastener: Screw, Bolt, Stud, Rivet

Choosing the Fastener: Screw, Bolt, Stud, Rivet

na MartinNO

Zana za Utengenezaji mbao

46
0
0
0
0
0

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...