SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Steel Rivets Forged in a Nail Header
Ted Hood (Wikimedia Commons) · Public domain
Forge

Imeundwa na

Forge

14. Oktoba 2026NO
20
0
0
0
0

Steel Rivets Forged in a Nail Header

A rivet is a short rod with a head on one end; set through a hole, its tail is hammered into a second head, and it holds the parts together for good. Solid rivets go back to the Bronze Age. They are forged the way nails are, headed in a nail header, only the shank is cut off square instead of drawn to a point. The picture: riggers setting red-hot rivets on the Sydney Harbour Bridge, 1930–31 (Sam Hood).
Kati
An afternoon for a few dozen

Maagizo

1

Heat the rod end

Heat the end of a mild steel rod of the rivet's diameter in the forge to a bright orange.

Vifaa kwa hatua hii:

Ufito wa chuma lainiUfito wa chuma laini1 m
MkaaMkaa1 as required

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
Koleo za mhunziKoleo za mhunzi
Glavu za kulehemuGlavu za kulehemu
Miwani ya usalamaMiwani ya usalama
2

Nick at length

Nick the rod nearly through on the hot cut hardy at the rivet's length plus enough for the head (see the notebook).

Zana zinazohitajika:

FuaweFuawe
Patasi ya kukata kwenye fuawePatasi ya kukata kwenye fuawe
Nyundo yenye kichwa cha msalabaNyundo yenye kichwa cha msalaba
Glavu za kulehemuGlavu za kulehemu
Miwani ya usalamaMiwani ya usalama
3

Head it

Drop the end into the nail header over the anvil's pritchel hole, with the head stock standing proud, and spread it with three to five quick blows, as for a nail head. Snap it free at the nick.

Zana zinazohitajika:

Kibamba cha kutengeneza vichwa vya misumariKibamba cha kutengeneza vichwa vya misumari
FuaweFuawe
Nyundo yenye kichwa cha msalabaNyundo yenye kichwa cha msalaba
Glavu za kulehemuGlavu za kulehemu
Miwani ya usalamaMiwani ya usalama
4

Cool and check

Let the rivets cool (do not harden them: the tail must spread cold or hot when set). Check the shank with a caliper; file off any burr so it slips into its hole.

Zana zinazohitajika:

Ndoo ya kupoza chumaNdoo ya kupoza chuma
Kipima-unene cha dijitali cha inchi 6Kipima-unene cha dijitali cha inchi 6
5

Rod for each rivet

Inapakia daftari la Jupyter…

Vifaa

2
  • 1
    Ufito wa chuma laini
    1 m
    Kishikilia Nafasi
  • 1
    Mkaa
    1 as required
    Kishikilia Nafasi

Zana Zinazohitajika

10

Mchoro huu unatengeneza

Thumbnail
Kishikilia nafasi

Rivet za chuma cha pua

Free

482
0
1

Blueprint zinazohusiana

Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni

Forging Iron Nails by Hand — Drawing, Cutting, and Heading

Forging Iron Nails by Hand — Drawing, Cutting, and Heading

na ForgeNO

Misumari

50
0
0
0
2
0
Mild Steel Bar Stock Forged from an Ingot

Mild Steel Bar Stock Forged from an Ingot

na ForgeNO

Kisasa

38
0
0
0
0
0

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...