Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Teapot: a Tinplate Picnic Teapot with Cock and Strainer (Hasluck, 1907)
Paul N. Hasluck (ed.) · Public domain (published 1907)
Forge

Imeundwa na

Forge

4. Novemba 2026NO
7
0
0
1
0

Teapot: a Tinplate Picnic Teapot with Cock and Strainer (Hasluck, 1907)

A square tinplate teapot from a picnic outfit: folded from one blank, with a hinged lid, and a cock at the bottom behind a perforated strainer that holds back the leaves. Blank 1 ft 4 1/4 in by 1 ft 0 3/8 in; lid 4 1/8 by 4 in. Source: Paul N. Hasluck, Tinplate Work (1907), pp. 37-39. Unknown: folding order, solder, the cock. Picture: Figs. 96-97 of the book.
Kati
Unknown

Maagizo

1

Cut the body blank

Cut a piece of tin 1 ft 4 1/4 in long by 1 ft 0 3/8 in wide and mark the pattern of Fig. 96 on it, with the hole for the cock tube. Not given: the folding order. Ours: bend it up on the dotted lines and solder the seams.

Vifaa kwa hatua hii:

Bamba la batiBamba la bati1 body
Lehemu ya bati na risasiLehemu ya bati na risasi1 kipande

Zana zinazohitajika:

Kichora MistariKichora Mistari
Mkasi wa batiMkasi wa bati
KigingiKigingi
Nyundo ya mbaoNyundo ya mbao
Pasi ya Umeme ya KulehemuPasi ya Umeme ya Kulehemu
FluksiFluksi
2

Fit the cock and strainer

Solder a tube about 1/2 in long into the hole for the cock (Fig. 97) and fit the cock to it. Develop the strainer (Fig. 98): top curve radius 1 13/16 in, chord corner to corner 2 15/16 in. Perforate it and solder it across the corner in front of the tube (Fig. 99).

Vifaa kwa hatua hii:

Neli ya shaba nyeupeNeli ya shaba nyeupe1 1/2 in
Bomba la kumwagiaBomba la kumwagia1 kipande
Bamba la batiBamba la bati1 strainer
Lehemu ya bati na risasiLehemu ya bati na risasi1 kipande

Zana zinazohitajika:

Bikari ya ncha mbiliBikari ya ncha mbili
Mkasi wa batiMkasi wa bati
Kitoboa matundu cha batiKitoboa matundu cha bati
Kipande cha mbao ngumuKipande cha mbao ngumu
Pasi ya Umeme ya KulehemuPasi ya Umeme ya Kulehemu
FluksiFluksi
3

Make the hinged lid

Cut the lid (Fig. 100) 4 1/8 by 4 in; the inner rectangle 3 1/2 by 3 1/2 in leaves 1/4 in to bend up. Cut hinge projections 1/2 in wide by 5/8 in deep with equal spaces, the outer ones only 1/4 in wide. Bend them round a wire 1/16 in thick. Hasluck adds that the teapot may be enamelled dark green.

Vifaa kwa hatua hii:

Bamba la batiBamba la bati1 lid
Waya wa chuma uliovutwa kwa bambaWaya wa chuma uliovutwa kwa bamba1 1/16 in

Zana zinazohitajika:

Mkasi wa batiMkasi wa bati
KigingiKigingi
Nyundo ya mbaoNyundo ya mbao

Vifaa

5

Zana Zinazohitajika

9

Vifaa vya Michoro Iliyounganishwa

Tinplate and Galvanized Steel Sheet from Coil
Usambazaji 10%

Tinplate and Galvanized Steel Sheet from Coil

na EmmaSE

Uchimbaji chuma

25
0
0
0
5
0
Colander: a Tinplate Colander with Perforated Body and Bottom (Hasluck, 1907)
Usambazaji 10%

Colander: a Tinplate Colander with Perforated Body and Bottom (Hasluck, 1907)

na ForgeNO

Industry 2.0 — Electricity, Steel & Oil (1870)

7
0
0
0
2
0

Mchoro huu unatengeneza

Thumbnail
Kishikilia nafasi

Birika la chai

Free

69
0
1

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...