SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI

The Two-Fulcrum Nut Cracker: A Pick Kept in the Handle
One cracker cannot suit both a small pecan and a big walnut, and the pick that goes with it is always lost on the table.
Herbert Story of Kearney, New Jersey, received US 417,951, dated 24 December 1889, for a combined nut cracker and picker "useful and convenient" and "neat in appearance and at a small cost": the jaws pivot on a variable fulcrum with one place for small nuts and one for larger nuts, and one handle is a tube in which the nut pick is kept, screwed in, until it is wanted. He wrote plainly: "I do not claim, broadly, a combined nut cracker and picker, as such implements, are not new".
This rung works out squeeze and handle spread for two fulcrum holes, then builds the cracker from flat bar with a brass-tube handle and cracks pecans and walnuts in each hole.
Kati
About 3 hours
Maagizo
1
1
Squeeze and handle spread
Squeeze and handle spread
Inapakia daftari la Jupyter…
2
2
A pivot that does the work
A pivot that does the work
The embedded blueprint builds pivoted tongs with a spring by the pivot. Story's cracker gives the pivot two places to go.
3
3
Read US 417,951
Read US 417,951
"In said drawings, a a represent the two jaws of a nut-cracker with handles a′ a′, and pivoted at a² to a variable fulcrum b, one portion of said fulcrum b′ being arranged for small nuts and the other portion b² for larger nuts."
"When the nut-cracker only is to be employed, the nut-pick is allowed to remain in the handle, secured by the screw f, where it is out of the way and in no manner interferes with the use of the cracker".
4
4
Build the cracker and crack both sizes
Build the cracker and crack both sizes
**Bars.** Cut two 20 cm lengths of 20 × 5 mm mild steel flat bar. File a shallow V across the inside face of each near one end: the jaws. Clamp the two bars together and drill two 6.5 mm holes through both, 20 mm and 35 mm from the middle of the jaws.
**Pick handle.** Cut 12 cm of 3/8" brass tube and epoxy it along the outside of one handle, open at the end, as the socket for a nut pick. Let it cure.
**Pivot.** Bolt the bars through the near hole with an M6 bolt and two nuts locked against each other.
**Test.** Crack five pecans and five walnuts; measure the handle spread at the crack with the ruler. Move the bolt to the far hole and do the same. Compare with the notebook and with your own grip. Keep the nut pick in the tube between uses.
Vifaa kwa hatua hii:
Pau Bapa la Chuma Laini0.4 mita
Mkusanyiko wa bolti za pembe sita1 kipande
Nati ya pembe sita2 vipande
Bomba la shaba la kipenyo cha nje milimita 9,50.12 mita
Utomvu wa epoksi5 ml
Kokwa ya walnati10 vipande
Pekani10 vipandeZana zinazohitajika:
Msumeno wa chuma
Kibano cha meza ya kazi
Tupa (Tupa ya Mkono)
Kekee cha Betri
Seti ya vichimbuzi
Spana inayoweza kurekebishwa
Rula
Kipima-unene cha dijitali cha inchi 6
Kifaa cha kutolea kiini cha njugu
Miwani ya usalama iliyo wazi5
5
A cracker that will not open wide enough or slips
A cracker that will not open wide enough or slips
Two-fulcrum nut cracker troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**Herbert Story** of Kearney, Hudson County, New Jersey, signed US 417,951 on 15 September 1888, filed it on 12 November 1888, and received it dated 24 December 1889. His solid handle carried a projection to match the socket on the other, "thus giving to the handle a uniform finish", and the pick screwed into the tubular handle.
**Honest limits.** Two drilled holes stand in for Story's fulcrum piece, and a push-fit brass tube for his threaded socket. The notebook assumes handles and jaws close together; its squeeze, lengths and nut sizes are examples. Your spreads and cracks are the result.
Vifaa
7- 0.4 mitaKishikilia Nafasi
- 1 kipandeKishikilia Nafasi
- 2 vipandeKishikilia Nafasi
- Kishikilia Nafasi
- 5 mlKishikilia Nafasi
- 10 vipandeKishikilia Nafasi
- 10 vipandeKishikilia Nafasi
Zana Zinazohitajika
10- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- 1 vendor sell this, none ship to you yetKishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
Mchoro huu unatengeneza
Blueprint zinazohusiana
Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni
CC0 Umma Wote
Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.
Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.



