Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Thimble: the Pitted Iron Thimble Gilt Inside (Rouy and Berthier, Ure 1839)
The Paris method of Rouy and Berthier: thin sheet-iron discs, red-hot, punched step by step into a cup through five ever-deeper hollows, then turned, pitted and annealed on the lathe, gilt inside with gold leaf pressed on by a steel mandril, and banded outside with a gold fillet.
Variable: closed (pitted round end) or open (no end, for tailors).
Source: Andrew Ure, Dictionary of Arts, Manufactures and Mines (1839), 'Thimble'. Picture: a modern pitted thimble (Commons, CC BY-SA 3.0).
Juu
Unknown
Maagizo
1
1
Punch the blanks
Punch the blanks
Cut sheet iron 1/24 in thick into strips sized for the thimbles. Run them under a punch press to cut discs about 2 in across, left joined by a tail, a dozen to a strip.
Vifaa kwa hatua hii:
Bamba la chuma (lililofuliwa)1 1/24 inZana zinazohitajika:
Mkandamizo wa kutoboa2
2
Sink the cup
Sink the cup
Heat the blanks red-hot and lay each on a mandril fitted to its size. Strike the middle with a round-faced punch about as thick as a finger to sink it into the first hollow, then drive it through a block with five hollows of increasing depth until it has the thimble's shape.
Zana zinazohitajika:
Jiko la Kufua
Koleo
Metali isiyojulikana
Nyundo3
3
Turn and pit on the lathe
Turn and pit on the lathe
Chuck the rough thimble in the lathe, polish the inside, turn the outside, mark the rings for the gold band, and press in the rows of pits with a milling tool.
Zana zinazohitajika:
Kereza ya Chuma
Zana ya kuchora mikwaruzo4
4
Anneal, gild and band
Anneal, gild and band
Anneal and brighten the thimbles. Line each inside with a thin cone of gold leaf, bonded to the iron by the hard pressure of a smooth steel mandril. Turn an annular seat outside, lay a gold fillet in it and press its edges into a fine groove cut on the lathe.
Vifaa kwa hatua hii:
Karatasi ya dhahabu1 liningMetali isiyojulikana1 gold filletZana zinazohitajika:
Jiko la Kufua
Fito ya mandreliKereza ya ChumaVifaa
3- 1 1/24 inKishikilia Nafasi
- 1 liningKishikilia Nafasi
- 1 gold filletKishikilia Nafasi
Zana Zinazohitajika
8- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
Mchoro huu unatengeneza
CC0 Umma Wote
Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.
Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.