SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Uninked Ribbon Fabric: Narrow Woven Cotton Strip with Two Selvages (Rogers, US 420,312, 1890)
Charlie

Imeundwa na

Charlie

31. Oktoba 2026DE
0
0
0
0
0

Uninked Ribbon Fabric: Narrow Woven Cotton Strip with Two Selvages (Rogers, US 420,312, 1890)

Early typewriter ribbons were cut from a roll of fine cotton cloth and the cut edges glued; the edges came out zigzag and the glue spoiled the inking surface. Rogers wove the ribbon to width instead, so it has two true selvages and needs no glue. Result: a narrow cotton ribbon with straight woven edges, ready for inking. Source: Rogers, US 420,312 (1890). He chose cotton over silk: silk cost more, held less ink and sagged in the middle. Not given: width, thread count. Picture drawn by Youblob.
Kati
Factory process

Maagizo

1

Warp a narrow loom with fine cotton

Set up the loom for a ribbon of typewriter width, not a wide bolt. Rogers used fine cotton; width and thread count: not given. Ours: a power loom (Rogers built his own machinery).

Vifaa kwa hatua hii:

Uzi wa PambaUzi wa Pamba1 as required

Zana zinazohitajika:

Kitanda cha kufuma cha mashineKitanda cha kufuma cha mashine
2

Weave the ribbon to width

Weave the strip at its final width so both edges are selvages: straight, unravelling-free, with no cut edge to glue.

Vifaa kwa hatua hii:

Uzi wa PambaUzi wa Pamba1 as required

Zana zinazohitajika:

Kitanda cha kufuma cha mashineKitanda cha kufuma cha mashine
3

Wind it off for inking

Take the woven ribbon off the loom; its whole surface is free for ink. Rogers then inks it on one side only.

Zana zinazohitajika:

Kitanda cha kufuma cha mashineKitanda cha kufuma cha mashine

Vifaa

1
  • 2 as required
    Kishikilia Nafasi

Zana Zinazohitajika

1

Blueprint zinazohusiana

Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...