SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Wedge-Plunger Potato Strainer: Turn a Wedge, the Mash Comes Out the Sides
YourGrandma

Imeundwa na

YourGrandma

6. Oktoba 2026IS
19
0
0
0
0

Wedge-Plunger Potato Strainer: Turn a Wedge, the Mash Comes Out the Sides

A plunger pushed straight down a strainer packs the potato and forces it only through the bottom. René Sebille of Baltimore received US 140,169, dated 24 June 1873, for a potato masher and strainer: a cylindrical strainer perforated all round its side and bottom, "through which the potato-mash can issue as fast as it is produced," and a plunger whose end is a wedge with two bevel faces, turned back and forth by two handles while pressed down, so it can be worked "with the least possible amount of power." This rung works out where the outlet area is, then prints the strainer and plunger and times a batch.
Mwanzo
About 1 hour, plus printing

Maagizo

1

Side and bottom outlets

Inapakia daftari la Jupyter…
2

A tube and plunger before it

The embedded blueprint pushes a flat plunger down a tube. Sebille perforates the sides too and turns a wedge instead of pushing.
3

Read US 140,169

"The plunger is then rotated back and forth by means of the handles D D, at the same time that a certain amount of pressure is exerted downward upon it. By this motion the bevel faces c c of the plunger displace and mash the potatoes, and force them through the openings a of the strainer, the peculiar double-bevel-faced shape of the plunger making it easy to accomplish the desideratum with the smallest amount of power, and yet very expeditiously."
4

Print the strainer and plunger

Print the perforated strainer with its handles and the plunger with its wedge end and cross handle. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Vifaa kwa hatua hii:

Uzi wa PETGUzi wa PETG1 kipande

Zana zinazohitajika:

Printa ya 3D ya nyuzi (FDM)Printa ya 3D ya nyuzi (FDM)
5

Print the strainer

The strainer, printed as step 4 describes.
Faili ya UsanifuSTLCC0 - Free
6

Print the plunger

The plunger, printed as step 4 describes.
Faili ya UsanifuSTLCC0 - Free
7

The build in 3D

FreeCAD model of this build, not of the patent: the 80 mm strainer with 288 side holes and a bottom grid of 4 mm holes and two handles, and the plunger with its double-bevel wedge and cross handle.
Faili ya UsanifuBLENDCC0 - Free
8

Cook the potatoes

Boil 500 g of potatoes, peeled and quartered, for about 20 minutes until a knife slides in; drain.

Vifaa kwa hatua hii:

ViaziViazi1 kipande
MajiMaji1 kipande

Zana zinazohitajika:

Sufuria yenye kuta ndefuSufuria yenye kuta ndefu
Mizani ya dijitali ya jikoniMizani ya dijitali ya jikoni
9

Turn and press

Stand the strainer in a bowl, fill it with hot potato, and turn the plunger to and fro with light pressure. Time the batch; then repeat pushing straight down only.
Hatua 9 - Image 1

Zana zinazohitajika:

Bakuli kubwa la kuchanganyia la chuma cha puaBakuli kubwa la kuchanganyia la chuma cha pua
Saa ya kupima mudaSaa ya kupima muda
10

A plunger that jams, a strainer that clogs

Wedge-plunger potato strainer troubleshooting.

Flow

Loading...
11

History and honest limits

**René Sebille** of Baltimore filed US 140,169 on 5 May 1873; it is dated 24 June 1873. The strainer can be held by its handles, given legs to stand over a dish, or fastened to a table; the plunger is cylindrical for most of its length to bear on the sides, though the wedge end with a short cylinder may be fixed to a long handle. He claimed the double-bevel plunger with the strainer. **Honest limits.** A printed strainer stands in for his tin one. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times are the result.

Vifaa

3
  • 1 kipande
    Kishikilia Nafasi
  • 1 kipande
    Kishikilia Nafasi
  • 1 kipande
    Kishikilia Nafasi

Zana Zinazohitajika

5

Faili za muundo

3

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...