예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
Glass Retort: a Blown Bulb with a Long Neck Bent Down
Bubbles

작성자

Bubbles

14. 10월 2026IT
20
0
0
0
0

Glass Retort: a Blown Bulb with a Long Neck Bent Down

A retort is the old distilling vessel: a round glass bulb whose long neck bends down to a receiver, so the neck itself condenses the vapour. Alchemists used it, and so did Lavoisier and Berzelius before condensers. Blow a bulb on a long tube, bend the tube down in a wide flame, and add a corked filling hole on top. The picture: a mid-19th-century glass retort with a stoppered filling hole (Wellcome Collection).
고급
Two hours, plus annealing

안내

1

Blow the bulb on a long tube

Close one end of a long tube, gather glass and blow a round bulb, as for a flask. Keep the rest of the tube full length for the neck.

이 단계의 재료:

유리관 키트유리관 키트1 개

필요한 도구:

탁상 유리 불기 토치탁상 유리 불기 토치
보안경보안경
내열 장갑내열 장갑
2

Bend the neck down

Warm a long stretch of the tube just past the bulb in a wide, soft flame, turning it, until it bends under its own weight. Bend it smoothly so the neck slopes down at a sharp angle, without kinking.

필요한 도구:

탁상 유리 불기 토치탁상 유리 불기 토치
내열 장갑내열 장갑
3

Filling hole

Heat a spot on the top of the bulb, blow it out into a small bubble, break it off and open it into a short collar with the jacks for a cork.

필요한 도구:

탁상 유리 불기 토치탁상 유리 불기 토치
Jacks(유리 장인의 잭스)Jacks(유리 장인의 잭스)
코르크코르크
4

Cut and anneal

Cut the neck end square, fire-polish it, and anneal the retort in the kiln, cooling slowly.

필요한 도구:

다이아몬드 금긋기 바늘다이아몬드 금긋기 바늘
탁상 유리 불기 토치탁상 유리 불기 토치
가마(킬른)가마(킬른)
5

Neck length for cooling

Jupyter 노트북 불러오는 중…

재료

1

필요 도구

7

이 블루프린트로 만드는 것

관련 블루프린트

이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리

CC0 퍼블릭 도메인

이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.

제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

토론

(0)

로그인 하여 토론에 참여하세요

댓글 로딩 중...