예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블

Pins in Eighteen Operations: Adam Smith's Pin Factory
In 1776 Adam Smith opened The Wealth of Nations with a pin workshop. One untrained worker, he wrote, "could scarce, perhaps, with his utmost industry, make one pin in a day, and certainly could not make twenty". Split into about eighteen distinct operations, ten men in a poorly equipped workshop made about twelve pounds of pins a day, at upwards of four thousand middling pins to the pound: over 48,000 pins, or 4,800 per worker. The operations are the blueprint: draw the wire, straighten, cut, point, grind the top, make and fix the head, whiten, and paper. Pins were long made of brass before steel took over, so here the wire is drawn from brass.
중급
Workshop process
안내
1
1
Draw out the wire
Draw out the wire
Draw the brass down through the holes of the drawplate to pin thickness.
이 단계의 재료:
황동 봉1 as required필요한 도구:
강철 인발판2
2
Straighten and cut
Straighten and cut
Straighten the wire, then cut it into pin lengths.
필요한 도구:
니퍼3
3
Point
Point
Point one end of each length.
4
4
Prepare the top and head it
Prepare the top and head it
Grind the other end to receive the head. Making the head takes two or three separate operations, and putting it on is a trade of its own.
필요한 도구:
회전 숫돌5
5
Whiten and paper
Whiten and paper
Whiten the pins, then put them into the paper, which Smith calls "a trade by itself".
이 블루프린트로 만드는 것
관련 블루프린트
이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리
CC0 퍼블릭 도메인
이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.
제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.



