
Weaving a Wicker Fish Trap — Funnel-Entry Basket Trap
Build a funnel-entry fish trap from woven willow withies. Fish swim in through the narrow funnel opening but cannot find their way back out. This passive trap works day and night without tending.
안내
Gather and Prepare Withies
Gather and Prepare Withies
Harvest green willow withies in spring or early summer when the sap is running — this is when they are most flexible. Select straight rods about 1-1.5 metres long and 3-5mm in diameter. You need 30-40 thin weavers and 8-10 thicker stakes (5-8mm) for the framework. Strip any leaves. If the withies have dried, soak them in water for several hours until pliable.
Build the Cylindrical Body
Build the Cylindrical Body
Arrange 8 thick stakes in a circle, their butt ends together, forming a radiating star pattern. Begin weaving thin withies in and out of the stakes using a simple randing weave — over one stake, under the next, repeating around the circle. After every 3-4 rows, push the weaving down tight. The body should form a cylinder about 30cm in diameter and 50-60cm long. The weave gaps should be small enough that target fish cannot escape through the walls.

Form the Funnel Entrance
Form the Funnel Entrance
At the open end of the cylinder, bend the stake tips inward gradually, weaving them together to form a funnel that narrows to an opening about 5-7cm wide. The funnel should extend 15-20cm into the trap body. Fish follow the funnel walls inward easily but the narrow opening and expanding interior confuse their escape instinct — they swim along the trap walls instead of finding the small hole. Secure the funnel tip stakes by weaving their ends into the body wall.
Close the Back End
Close the Back End
Weave the back end of the trap closed by bending the remaining stakes inward and interlocking them in a dome shape. Leave a small removable panel or tie-closed flap so you can retrieve fish without destroying the trap. This can be a simple bundle of withies lashed in place with cordage that you untie to harvest.
Set the Trap
Set the Trap
Place bait inside the trap — fish scraps, crushed berries, or bread work as attractants. Position the trap in shallow water with the funnel entrance facing downstream. Fish moving upstream will naturally enter the funnel. Weight the trap with stones placed on top to prevent it floating away. Check the trap every 12-24 hours. In productive waters, a single trap can yield several fish per day without any active effort.

재료
- •Willow withies (green, flexible) - 30-40 rods, 1-1.5m long piece플레이스홀더
- •Thicker willow stakes - 8-10 rods, 5-8mm diameter piece플레이스홀더
- •Cordage for binding - 2m piece플레이스홀더
- •Bait (fish scraps, berries) - as needed piece
필요 도구
- Flint knife플레이스홀더
CC0 퍼블릭 도메인
이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.
제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.