예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
Rocking-Stool Churn: Rock the Churn, the Dashers Ride With It
A churn worked by a dasher or crank needs a strong arm for half an hour.
Enoch Thomas of Harrisonburg, Virginia, received US 753, dated 30 May 1838, for a rocking churn: a rectangular or curved churn of tin or wood fastened on a stool with four legs resting on rockers, two dashers "perforated with holes, or ... made in the form of a balustrade" set in grooves so they move with it, and a vent or wire gauze over the opening. "A small child or adult may then rock the churn as an amusement, and the butter will be quickly produced."
This rung works out the rocking pace, then prints the perforated dashers and gauze vent, builds the churn on a rocking stool, and makes butter.
초급
About 3 hours, plus printing
안내
1
1
Butter yield and rocking pace
Butter yield and rocking pace
Jupyter 노트북 불러오는 중…
2
2
The churning it does
The churning it does
The embedded blueprint makes butter by agitating cream. Thomas lets rocking do the agitating.
3
3
Read US 753
Read US 753
"Among the many advantages which my churn possesses over others is, that it gathers the butter sooner and more easily than any other churn. This cannot be done, however, so well with dashers immovable. They must be taken out in order to collect the butter and one inserted in the middle."
4
4
Print the dashers and vent
Print the dashers and vent
Print two perforated dashers (/uploads/blueprints/rocking-stool-churn-dasher.stl) and the gauze vent (/uploads/blueprints/rocking-stool-churn-vent.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
이 단계의 재료:
PETG 필라멘트1 개필요한 도구:
FDM 3D 프린터5
5
Make the churn
Make the churn
Take a food-safe storage box about 180 × 90 × 110 mm. Glue pairs of plywood strips inside both sides at one and two thirds of its length as grooves for the dashers. Cut a 26 mm hole in the lid and press the vent into it.
이 단계의 재료:
HDPE 보관 용기1 개
합판1 개
실리콘 실런트1 개필요한 도구:
실톱(코핑 소)
홀소 세트
무선 드릴6
6
Build the rocking stool
Build the rocking stool
Make a plywood stool top the size of the box on four legs 50 mm long, and screw two rockers cut to a 400 mm radius across the legs. Strap the box to the top.
이 단계의 재료:
합판1 개
경목 블록1 개
#8 × 1인치 나무 나사1 개필요한 도구:
실톱(코핑 소)무선 드릴
드릴 비트 세트
드라이버 세트7
7
The patent drawing
The patent drawing
US 753 drawing sheet, public domain (expired patent).
8
8
Rock and gather
Rock and gather
Let 500 ml of heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour it in, fit the lid and rock steadily; time until the butter comes. Then take both dashers out, set one in the middle, and rock slowly to gather it, as he did. Pour off the buttermilk, add cold water, churn a few turns and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
이 단계의 재료:
생크림500 ml
굵은 천일염1 개
물1 개필요한 도구:
꽂아 두는 프로브 온도계
스톱워치
디지털 주방 저울
큰 스테인리스강 믹싱볼9
9
A churn that tips, splashes or will not come
A churn that tips, splashes or will not come
Rocking-stool churn troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Enoch Thomas** of Harrisonburg, Rockingham County, Virginia, received US 753, dated 30 May 1838. If the churn is small, one dasher may suffice; the lid may be left off for air, or the top made flat and covered with wire gauze to keep out flies; the churn is easily cleaned by pouring off the buttermilk, throwing in water and rinsing. He claimed the gauze covering.
**Honest limits.** A storage box and printed dashers stand in for his tin or wooden churn. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
재료
9- 1 개플레이스홀더
- 1 개플레이스홀더
- 1 개플레이스홀더
- 1 개플레이스홀더
- 1 개플레이스홀더
- 플레이스홀더
- 500 ml플레이스홀더
- 1 개플레이스홀더
- 1 개플레이스홀더
이 블루프린트로 만드는 것
관련 블루프린트
이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리
CC0 퍼블릭 도메인
이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.
제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.