예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블

The Sagnac Interferometer
Georges Sagnac built it in 1913 hoping to prove the aether existed, which by then was a minority position, and instead produced the one interferometer that measures something no other instrument can get at without looking outside.
Split a beam and send the two halves round the SAME closed loop in opposite directions. If the loop is stationary the two paths are identical and the fringes sit still. If the loop is rotating, the beamsplitter has moved slightly by the time each beam returns — further away for the beam travelling with the rotation, nearer for the one going against — and the fringes shift in proportion to the rate.
What makes it extraordinary is what is absent from the formula. The shift depends on the enclosed AREA and the rotation rate, and on nothing else: not the shape of the loop, not what it is made of, not the refractive index, and not anything outside it. There is no reference and nothing to see. A sealed box can know it is turning.
A bench-sized loop sees a turntable and cannot possibly see the Earth. The fix is to enclose the area many times over — a kilometre of optical fibre wound on an eight-centimetre former gives four thousand turns, and that instrument detects the Earth's rotation. Ring laser and fibre optic gyroscopes have flown aircraft since the 1980s, and there is nothing inside them that moves.
고급
4 hours
안내
1
1
Close the loop
Close the loop
Rebuild the Michelson's optics as a square: beamsplitter at one corner, front-surface mirrors at the other three, so a beam entering the splitter goes right round and comes back. Both directions travel the same square.
Align by walking each mirror until the two counter-propagating beams overlap on the output card. Fringes appear when they do. Mount the whole board on a turntable, with the laser on the board so nothing crosses the rotating boundary.
이 단계의 재료:
Beam Splitter Cube1 개
Front-Surface Mirror (50mm)3 개
Quartz Sand (clean)8 kg필요한 도구:
Laser Pointer
Laser Safety Glasses
Optical Bench Kit
Digital Tachometer2
2
Turn it and watch
Turn it and watch
Spin the turntable steadily and read the rate with the optical tachometer. Watch the fringe pattern with the photodiode and the scope rather than by eye — the shift for a bench loop is a fraction of a fringe.
Reverse the direction. The shift reverses too, and that sign change is the proof: vibration and thermal drift do not care which way you turn, and this does.
필요한 도구:
Digital Tachometer
Photodiode (BPW34)
Digital Oscilloscope3
3
Area, turns, and the gyroscope comparison
Area, turns, and the gyroscope comparison
Jupyter 노트북 불러오는 중…
필요한 도구:
Desktop Computer4
4
Compendium: lock-in, and dithering out of it
Compendium: lock-in, and dithering out of it
THE FAULT THAT NEARLY KILLED THE RING LASER GYRO. In a ring LASER, the two directions are not passive beams but two lasing modes whose frequency difference is the output. Any tiny back-scatter from a mirror couples them, and coupled oscillators pull into step — so below some threshold rotation rate the frequency difference collapses to exactly zero and the instrument reads no rotation at all. This LOCK-IN is not noise; it is a dead band around the one measurement you most want to be accurate, slow drift.
The standard cure is almost comic: mechanically DITHER the whole laser block back and forth through a few hundred hertz so it is essentially never near zero rate, and subtract the known dither afterwards. A device whose whole selling point is having no moving parts is given one deliberately, and that is why a ring laser gyro can be heard whining. A fibre optic gyro avoids the problem entirely by staying passive — no lasing in the loop, so nothing to lock — which is why it won the cheaper end of the market.
재료
3- 플레이스홀더
- 플레이스홀더
- 8 kg플레이스홀더
필요 도구
7- 플레이스홀더
- 플레이스홀더
- 플레이스홀더
- Digital Oscilloscope10% 수수료Magento Legacy Storeships internationally플레이스홀더
- 플레이스홀더
관련 블루프린트
이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리
CC0 퍼블릭 도메인
이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.
제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.



